After an extensive introductory chapter (Chapter I), in which the background and the aim of the research is dealt with, the hydrothermal synthesis and the characterization of Na-beidellite is discussed in Chapter II and III. The conditions of temperature, water pressure, and sodium activity under which Na-beidellite can be synthesized in the chemical system Na₂0-AI₂0₃-Si0₂-H₂0 are investigated in Chapter IV. The stability field is limited at low temperatures by the formation of kaolinite and at high temperatures by that of paragonite and quartz. In Chapter V solid-state magic-angle spinning 23Na NMR combined with XRD and TGA is used to study the interlayer collapse and the migration of sodium present at the interlayer during dehydration of ...
Smectite-type clays from the state of Pará, Brazil, were characterized by XRD, 27Al MAS NMR, FTIR an...
International audienceSmectite, the main clay mineral in bentonites, is responsible for their low pe...
The A1 adsorption maximum for montmorillonite is close to 5.5 mEq A1/g clay, whereas the maximum for...
After an extensive introductory chapter (Chapter I), in which the background and the aim of the res...
Abstract--The dehydration and migration of the interlayer cation of the synthetic beidellite Nao.Tm1...
In the chemical system NaO-AlO-SiO-HO, the stability field of Na-beidellite is presented as a functi...
Abstract--In the chemical system NayO-AIyO3-SiO2-HyO, the stability field of Na-beidellite is presen...
The pillaring process of montmorillonite and beidellite with Al and Ga polymers has been studied usi...
Na-beidellite was hydrothermally synthesized using various starting materials at a range of P-T cond...
and a natural bentonite from Peru (P bentonite) were used in the preparation of pillared clays with ...
Na-beidellite, a member of the smectite group, was grown hydrothermally from a gel of composition 0....
Saponite, hectorite, and laponite have been pillared with cationic Al clusters, and special attentio...
Abstract--Hectorite and saponite are exchanged with [AlI304(OH)24(H20)12] 7+ and the amount of Al 3+...
Synthetic beidellite, hectorite (laponite) and two natural montmorillonites of high (3,35 wt Z) and ...
Abstraet--Saponite, h ctorite, and laponite have been pillared with cationic A1 clusters, and specia...
Smectite-type clays from the state of Pará, Brazil, were characterized by XRD, 27Al MAS NMR, FTIR an...
International audienceSmectite, the main clay mineral in bentonites, is responsible for their low pe...
The A1 adsorption maximum for montmorillonite is close to 5.5 mEq A1/g clay, whereas the maximum for...
After an extensive introductory chapter (Chapter I), in which the background and the aim of the res...
Abstract--The dehydration and migration of the interlayer cation of the synthetic beidellite Nao.Tm1...
In the chemical system NaO-AlO-SiO-HO, the stability field of Na-beidellite is presented as a functi...
Abstract--In the chemical system NayO-AIyO3-SiO2-HyO, the stability field of Na-beidellite is presen...
The pillaring process of montmorillonite and beidellite with Al and Ga polymers has been studied usi...
Na-beidellite was hydrothermally synthesized using various starting materials at a range of P-T cond...
and a natural bentonite from Peru (P bentonite) were used in the preparation of pillared clays with ...
Na-beidellite, a member of the smectite group, was grown hydrothermally from a gel of composition 0....
Saponite, hectorite, and laponite have been pillared with cationic Al clusters, and special attentio...
Abstract--Hectorite and saponite are exchanged with [AlI304(OH)24(H20)12] 7+ and the amount of Al 3+...
Synthetic beidellite, hectorite (laponite) and two natural montmorillonites of high (3,35 wt Z) and ...
Abstraet--Saponite, h ctorite, and laponite have been pillared with cationic A1 clusters, and specia...
Smectite-type clays from the state of Pará, Brazil, were characterized by XRD, 27Al MAS NMR, FTIR an...
International audienceSmectite, the main clay mineral in bentonites, is responsible for their low pe...
The A1 adsorption maximum for montmorillonite is close to 5.5 mEq A1/g clay, whereas the maximum for...