Functionalization of cotton with poly-NiPAAm/chitosan microgel. Part I. Stimuli-responsive moisture management properties

Stimuli-responsive microgel, based on synthetic polymer (poly-NiPAAm) and biopolymer (chitosan), was incorporated onto cotton fabric surface by pad-dry-cure method using 1,2,3,4-butanetetracarboxylic acid (BTCA) as crosslinker. In order to assess the moisture management properties of cotton functionalized with responsive microgel, the effects of temperature, relative humidity and concentration of microgel on water vapour transmission rate (WVTR) and moisture content (MC) were quantified. Since the use of experimental design is considered as a highly attractive feature in dealing with experiments and variables of this nature, the effects were quantified by using a central composite design. The regression equations obtained from the statistical analysis allowed the prediction of WVTR and MC at different ambient conditions. Material properties such as crease recovery and whiteness were also measured. The results indicate that both relative humidity and temperature significantly influence studied responses (WVTR and MC), showing that good perspiration can be achieved at lower humidity levels and at higher temperatures. The observed phenomena are attributed to controlled expansion (or contraction) of the surface incorporated microgel, which acts as a sensor of temperature and as a valve to regulate the water vapour permeability of functionalized cotto