In this work, Saponification reaction of ethyl acetate by sodium hydroxide is studied experimentally in a\ud continuous stirred tank reactor at 1 atmospheric pressure. The aim of this study is to investigate the influence of\ud operating conditions on the conversion and specific rate constant. The parameters considered for analysis are\ud temperature, feed flow rate, residence time, volume of reactor and stirrer rate. The steady state conversion of\ud 0.45 achieved after a period of 30 minutes. Conversion decreases with increase of reactant flow rate due to\ud decrease of residence time. The stirrer rate has a positive effect on the conversion and rate constant. Specific rate\ud constant and conversion increase with temperature within the s...
The choice of impeller type is an important factor in maximizing the performance of a stirred tank r...
The continuous stirred tank reactor is a dynamic system exhibiting nonlinear behavior such as multip...
A reactor of rectangular cross-sectional, area was constructed of plexiglass to study the effect of ...
The effect of reactor geometry on the percent completion of a second order reaction was studied in f...
Microreactors intensify chemical processes due to improved flow regimes, mass and heat transfer. In ...
The purpose of this research is to investigate dynamic and steady state phenomenon within Single-Con...
The current study deals with the maximization of NaOH conversion using step-wise regression analysis...
Understanding the behavior of Continuous Stirred-Tank Reactors (CSTR) and Plug Flow Reactors (PFR) i...
The Chemical Reactor Engineering has proven to be an important part of chemical engineering; it pro...
The reaction kinetics of the heterogeneously catalyzed esterification of <i>n</i>-hexyl acetate were...
Numerous continuous intensified reactors are now accessible on the market that offer enhanced therma...
Chromatographic reactors are based on coupling chemical reactions with chromatographic separation in...
Reactor engineering is the most unique part of chemical engineering and its technology has gain tre...
In this research saponification reaction of ethyl acetate and sodium hydroxide is carried out and th...
We used the nonlinear frequency response (NFR) method in order to identify forced periodic condition...
The choice of impeller type is an important factor in maximizing the performance of a stirred tank r...
The continuous stirred tank reactor is a dynamic system exhibiting nonlinear behavior such as multip...
A reactor of rectangular cross-sectional, area was constructed of plexiglass to study the effect of ...
The effect of reactor geometry on the percent completion of a second order reaction was studied in f...
Microreactors intensify chemical processes due to improved flow regimes, mass and heat transfer. In ...
The purpose of this research is to investigate dynamic and steady state phenomenon within Single-Con...
The current study deals with the maximization of NaOH conversion using step-wise regression analysis...
Understanding the behavior of Continuous Stirred-Tank Reactors (CSTR) and Plug Flow Reactors (PFR) i...
The Chemical Reactor Engineering has proven to be an important part of chemical engineering; it pro...
The reaction kinetics of the heterogeneously catalyzed esterification of <i>n</i>-hexyl acetate were...
Numerous continuous intensified reactors are now accessible on the market that offer enhanced therma...
Chromatographic reactors are based on coupling chemical reactions with chromatographic separation in...
Reactor engineering is the most unique part of chemical engineering and its technology has gain tre...
In this research saponification reaction of ethyl acetate and sodium hydroxide is carried out and th...
We used the nonlinear frequency response (NFR) method in order to identify forced periodic condition...
The choice of impeller type is an important factor in maximizing the performance of a stirred tank r...
The continuous stirred tank reactor is a dynamic system exhibiting nonlinear behavior such as multip...
A reactor of rectangular cross-sectional, area was constructed of plexiglass to study the effect of ...