Silver particles-modified carbon paste electrodes for differential pulse voltammetric determination of paraquat in ambient water samples

This paper describes the construction of silver particles-impregnated carbon paste electrode (Ag-CPE). The new electrode revealed an interesting determination of paraquat (II). The latter was accumulated on the modified electrode surface by adsorption onto silver particles and was reduced in 0.1 mol L−1 of Na2SO4 electrolyte at −0.70 V and −1.0 V for peaks 1 and 2, respectively. Experimental conditions were optimized by varying the heating temperature of the silver/carbon composite, the Ag/CP ratio, pH of measuring solution and accumulation time. Under the optimized working conditions, calibration graphs were linear for the concentration ranging from 1.0 × 10−7 to 1.0 × 10−3 mol L−1 with detection limits (DL, 3σ) 3.3 and 6.4 × 10−9 mol L−1, respectively, for peaks 1 and 2. The precision of this methodology was evaluated for eight successive measurements of the same samples containing 1.0 × 10−4 mol L−1 of paraquat. The relative standard deviations (D.S.R.) were 1.9% and 2.4% for the peaks 1 and 2, respectively. The Ag/CP composite was characterized by X-ray diffraction (XRD) and BET adsorption analysis