Field programmable gate array–based servo control integrated chip for a six-axis articulated robot manipulator

The objective of this article is to build a field programmable gate array–based six-axis servo control integrated chip which can integrate the function of a motion trajectory planning and the function of six position/speed/current servo controllers into one integrated chip. In the work, first, a mathematical modeling of a robot manipulator with the actuator using permanent magnet synchronous motor is derived. Second, the proportional controller in the position loop, a proportional–integral controller in the speed loop and a vector controller in the current loop for each axis are applied. Third, a system on a programmable chip) technology which comprises an Altera field programmable gate array chip and an embedded soft-core Nios-II processor is considered to develop the proposed servo control integrated chip. However, in the servo control integrated chip, it has two modules. The first module is an embedded soft-core Nios-II processor which is used to generate the motion trajectory planning by software. The second module presents a six-axis servo controller intellectual property by hardware which is applied to execute six position/speed/current controllers. Therefore, the function of a motion trajectory command and the function of six position/speed/current servo controllers for a six-axis robot manipulator can be integrated into one field programmable gate array. Finally, to verify the effectiveness and correctness of the proposed field programmable gate array–based servo control integrated chip, a six-axis robot manipulator is applied and some experimental results are demonstrated