The present work examines the effect of Ru doping on MoO3 thin films on steel substrate deposited by Sol-gel spin coat method. The annealing temperature was 6000C for pure MoO3 and 8000C for Ru doped thin films. The doping concentration of Ru was varied from 10 to 50wt%. The influence of Ru doping on structural and morphological properties of MoO3 thin films were studied. The XRD revealed that all films are highly crystalline in nature with monoclinic phase for molybdenum peaks. In the doped XRD pattern some new peaks were observed and are matched with ruthenium orthorhombic phase indicating an incorporation of dopant in pure molybdenum oxide. The same is confirmed with the compositional analysis by EDAX. The SEM images of the MoO3 resemble...
Thin films of MoO3 deposited on Si(111) and Al2O3(001) substrates by atomic layer deposition have be...
The aim of this work is the preparation and characterization of molybdenum (V) oxide films, obtained...
Electrochromic molybdenum oxide (MoO3) thin films were prepared by electron beam evaporation techniq...
There is a growing necessity of transition metal oxide thin film for many important technological ap...
Molybdenum oxide (MoO3) and Fe,Co-codoped MoO3 thin films obtained by spray pyrolysis have been in-d...
Mn-doped and pristine Ruthenium Oxide composite nanostructures in thin film form were prepared on st...
In this work, the authors investigated MoO3 films with thickness between 30 nm and 1 μm grown at ro...
Due to their excellent structural and optical properties of molybdenum oxide thin films are used in ...
"Accepted Manuscript"In this work, the substrate temperature (TS) effect on the microstructure, opti...
Thin films of molybdenum trioxide were deposited onto glass and electrically conducting substrates f...
The study results of the surface morphology of molybdenum thin films phase composition and iron oxid...
53rd International Symposium of the American-Vacuum-Society, San Francisco, CA, NOV 12-17, 2006Inter...
MoO3 layers on Au(111) were prepared via oxidation of molybdenum at elevated temperature in an atmos...
MoO<sub>3</sub> layers on Au(111) were prepared via oxidation of molybdenum at elevated temperature ...
Mixed Fe–Mo oxides are used in industrial catalytic processes of selective oxidation of methanol to ...
Thin films of MoO3 deposited on Si(111) and Al2O3(001) substrates by atomic layer deposition have be...
The aim of this work is the preparation and characterization of molybdenum (V) oxide films, obtained...
Electrochromic molybdenum oxide (MoO3) thin films were prepared by electron beam evaporation techniq...
There is a growing necessity of transition metal oxide thin film for many important technological ap...
Molybdenum oxide (MoO3) and Fe,Co-codoped MoO3 thin films obtained by spray pyrolysis have been in-d...
Mn-doped and pristine Ruthenium Oxide composite nanostructures in thin film form were prepared on st...
In this work, the authors investigated MoO3 films with thickness between 30 nm and 1 μm grown at ro...
Due to their excellent structural and optical properties of molybdenum oxide thin films are used in ...
"Accepted Manuscript"In this work, the substrate temperature (TS) effect on the microstructure, opti...
Thin films of molybdenum trioxide were deposited onto glass and electrically conducting substrates f...
The study results of the surface morphology of molybdenum thin films phase composition and iron oxid...
53rd International Symposium of the American-Vacuum-Society, San Francisco, CA, NOV 12-17, 2006Inter...
MoO3 layers on Au(111) were prepared via oxidation of molybdenum at elevated temperature in an atmos...
MoO<sub>3</sub> layers on Au(111) were prepared via oxidation of molybdenum at elevated temperature ...
Mixed Fe–Mo oxides are used in industrial catalytic processes of selective oxidation of methanol to ...
Thin films of MoO3 deposited on Si(111) and Al2O3(001) substrates by atomic layer deposition have be...
The aim of this work is the preparation and characterization of molybdenum (V) oxide films, obtained...
Electrochromic molybdenum oxide (MoO3) thin films were prepared by electron beam evaporation techniq...