Behaviour of Single Pile in Reinforced Slope Subjected to Inclined Load

Deep foundations, including driven piles, are used to support vertical loads of structures and lateral forces. Typical structures subjected to lateral loads include bridge abutments, transmission tower, sand offshore platforms. Traffic, wind, wave, and seismic forces are common types of lateral loads subjected to pile foundations. The present work is focused on understanding the lateral load capacity of vertical piles located near crest of the slope and subjected to the lateral and inclined loads. The experimental investigation was carried out to study the effect of reinforcing an earth slope on the inclined loading behavior of a single vertical pile located near the slope. Layers of geogrid were used to reinforce a sandy slope of 1V:2H. The parametric studies were performed by varying the length of pile(L), angle of inclination of load (θ), number of geogrid reinforcement (Nr) and crest distance. It was observed that the lateral load capacity of pile depends upon these parameters. The lateral load capacity of pile increases with increase in inclination of load, length of pile(L), number of geogrid reinforcement (Nr) and crest distance