Add to ORKGThe paper deals with a new 2DOF PI and PID controllers tuning method for integrating plants. The described approach is derived from the multiple dominant pole method and it enables the achievement of an aperiodic servo and regulatory step responses
This paper presents a new PID and PID-like controller design method that permits the designer to con...
In this paper, a new tuning method is proposed, based on the desired dynamics equation (DDE) and the...
lthough proportional-integral-derivative (PID) controllers are widely used in the process indus-try,...
At present the two degrees of freedom (2DOF) controllers are more often available. These controllers...
The article describes the unified approach to the tuning of the analog and digital PI controller wit...
The paper deals with a new 2DOF PI and PID controllers tuning method for integrating plants. The des...
Tuning rules for PID and PI-PI servo controllers are developed using a pole placement approach with ...
Tuning rules for position and velocity controllers in P-PI and PI-PI electrical servomechanisms are ...
An innovative method for tuning PI controllers with balanced proportional and integral actions. Tuni...
The design of control systems is a multi-objective problem so, a two-degree-of-freedom (abbreviated ...
The control of stable processes using PI/PID controllers is by now a well established and understood...
its remarkable effectiveness and simplicity of This paper presents one of the simplest method to tun...
10.1016/j.cherd.2013.09.012Chemical Engineering Research and Design923545-558CERD
In this paper a novel tuning procedure for Two-Degree-of-Freedom (2-DOF) PID controllers is proposed...
The aim of the paper is to present the synthesis method of classic PID controller for a class of un...
This paper presents a new PID and PID-like controller design method that permits the designer to con...
In this paper, a new tuning method is proposed, based on the desired dynamics equation (DDE) and the...
lthough proportional-integral-derivative (PID) controllers are widely used in the process indus-try,...
At present the two degrees of freedom (2DOF) controllers are more often available. These controllers...
The article describes the unified approach to the tuning of the analog and digital PI controller wit...
The paper deals with a new 2DOF PI and PID controllers tuning method for integrating plants. The des...
Tuning rules for PID and PI-PI servo controllers are developed using a pole placement approach with ...
Tuning rules for position and velocity controllers in P-PI and PI-PI electrical servomechanisms are ...
An innovative method for tuning PI controllers with balanced proportional and integral actions. Tuni...
The design of control systems is a multi-objective problem so, a two-degree-of-freedom (abbreviated ...
The control of stable processes using PI/PID controllers is by now a well established and understood...
its remarkable effectiveness and simplicity of This paper presents one of the simplest method to tun...
10.1016/j.cherd.2013.09.012Chemical Engineering Research and Design923545-558CERD
In this paper a novel tuning procedure for Two-Degree-of-Freedom (2-DOF) PID controllers is proposed...
The aim of the paper is to present the synthesis method of classic PID controller for a class of un...
This paper presents a new PID and PID-like controller design method that permits the designer to con...
In this paper, a new tuning method is proposed, based on the desired dynamics equation (DDE) and the...
lthough proportional-integral-derivative (PID) controllers are widely used in the process indus-try,...