This research had focused on glass fiber reinforced polymer (GFRP) reinforced concrete flat plate slabs with symmetrical openings. The results of ten interior slab-column connections were presented and discussed. The test parameters are reinforcement ratio, reinforcement type, and openings location. The specimens had been tested under monotonic concentric loading up to failure. The result showed that increasing the reinforcement ratio resulted in higher punching shear-shear capacity, lower deflection, and lower reinforcement ratio. Existing of openings reduced the punching shear capacity, and increased of the deflection, for instance, when spaced of opening's location form column face up to three times of effective depth, it will be issue...
This paper presents the results of experimental investigations on reinforced concrete slabs strength...
This article provides experimental data on the punching shear behavior of synthetic fiber-reinforced...
Punching in slabs is generally seen by the application of concentrated loads or to the presence of c...
This research had focused on glass fiber reinforced polymer (GFRP) reinforced concrete flat plate sl...
This study investigated the punching shear behavior of full-scale, two-way concrete slabs reinforced...
Flat slab system is widely used because of its architectural flexibility Punching is one of the majo...
This study investigated the punching shear behavior of full-scale, two-way concrete slabs reinforced...
punching shear failure of the flat plat of the column location especially of two-way flat plat is on...
With increasing attractiveness among industry professionals, the application of Glass Fiber Reinforc...
This paper carried out An examination of the performance characteristics of concrete beams including...
This paper describes the results of experimental testing of glass fiber reinforced plastic (GFRP) co...
Deterioration of reinforced-concrete (RC) structures due to corrosion of steel limits the service-li...
This study is an experimental and analysis investigation of the behavior of two-way simply supported...
This paper focuses on investigating the influence of creating an opening in the vicinity of a column...
This paper presents the results of experimental investigations on reinforced concrete slabs strength...
This paper presents the results of experimental investigations on reinforced concrete slabs strength...
This article provides experimental data on the punching shear behavior of synthetic fiber-reinforced...
Punching in slabs is generally seen by the application of concentrated loads or to the presence of c...
This research had focused on glass fiber reinforced polymer (GFRP) reinforced concrete flat plate sl...
This study investigated the punching shear behavior of full-scale, two-way concrete slabs reinforced...
Flat slab system is widely used because of its architectural flexibility Punching is one of the majo...
This study investigated the punching shear behavior of full-scale, two-way concrete slabs reinforced...
punching shear failure of the flat plat of the column location especially of two-way flat plat is on...
With increasing attractiveness among industry professionals, the application of Glass Fiber Reinforc...
This paper carried out An examination of the performance characteristics of concrete beams including...
This paper describes the results of experimental testing of glass fiber reinforced plastic (GFRP) co...
Deterioration of reinforced-concrete (RC) structures due to corrosion of steel limits the service-li...
This study is an experimental and analysis investigation of the behavior of two-way simply supported...
This paper focuses on investigating the influence of creating an opening in the vicinity of a column...
This paper presents the results of experimental investigations on reinforced concrete slabs strength...
This paper presents the results of experimental investigations on reinforced concrete slabs strength...
This article provides experimental data on the punching shear behavior of synthetic fiber-reinforced...
Punching in slabs is generally seen by the application of concentrated loads or to the presence of c...