Quartz Crystal Microbalance (QCM) is used to measure the volumetric and total sputtering yield of Boron Nitride (BN) and Boron Nitride Silicon Dioxide (BNSiO2) bombarded by Xenon ions in the energy range of 100 eV to 550 eV. Sputtering yield shape profiles are reported at various angles of incidence 0-85° with surface normal and compared with modified Zhang model. The yield shape profile is found to be symmetric at normal incidence and asymmetric at oblique incidence. Both the materials show a sudden jump in the sputtering yield above 500 eV and at an angle of incidence in the range of 45-65°. Erosion of BN at as low as 74 eV ion energy is predicted using generalized Bohdansky model. BNSiO2 show a marginally higher sputtering yield compare ...
The sputtering yield of molybdenum under xenon ion bombardment was measured using a Quartz Crystal M...
In this paper we present the characterization of the sputtering behavior of a RF ion thruster (RIT-1...
Boron ultralow energy (0.2–3 keV) high dose (1E15 cm−2) implants in single crystalline Si (100) were...
In this contribution we present results of differential sputter yield measurements of boron nitride,...
An accurate description of the sputter yield of boron nitride (BN) from xenon ion bombardment at low...
The durability of a high-powered Hall thruster may be limited by the sputter erosion resistance of i...
In this paper, we describe a technique that was used to measure total and differential sputter yield...
Sputtering of boron nitride with xenon ions was investigated using secondary ion (SIMS) and secondar...
Sputtering of spacecraft surfaces by energetic xenon ions in the plumes of Hall thrusters is a prima...
Specific laboratory testing equipment, which allows studying the Sputtering behavior of Electric Pro...
The sputter yield is an important material parameter not only for various surface treatment techniq...
Abstract: Differential sputter yields are reported for Molybdenum, Tantalum, and Tungsten after expo...
The sputtering yield of molybdenum under xenon ion bombardment was measured using a Quartz Crystal M...
An experimental study is described to measure low-energy (less than 600 eV) sputtering yields of mol...
Worn Hall-effect thrusters show a variety of unique microstructures and elemental compositions in th...
The sputtering yield of molybdenum under xenon ion bombardment was measured using a Quartz Crystal M...
In this paper we present the characterization of the sputtering behavior of a RF ion thruster (RIT-1...
Boron ultralow energy (0.2–3 keV) high dose (1E15 cm−2) implants in single crystalline Si (100) were...
In this contribution we present results of differential sputter yield measurements of boron nitride,...
An accurate description of the sputter yield of boron nitride (BN) from xenon ion bombardment at low...
The durability of a high-powered Hall thruster may be limited by the sputter erosion resistance of i...
In this paper, we describe a technique that was used to measure total and differential sputter yield...
Sputtering of boron nitride with xenon ions was investigated using secondary ion (SIMS) and secondar...
Sputtering of spacecraft surfaces by energetic xenon ions in the plumes of Hall thrusters is a prima...
Specific laboratory testing equipment, which allows studying the Sputtering behavior of Electric Pro...
The sputter yield is an important material parameter not only for various surface treatment techniq...
Abstract: Differential sputter yields are reported for Molybdenum, Tantalum, and Tungsten after expo...
The sputtering yield of molybdenum under xenon ion bombardment was measured using a Quartz Crystal M...
An experimental study is described to measure low-energy (less than 600 eV) sputtering yields of mol...
Worn Hall-effect thrusters show a variety of unique microstructures and elemental compositions in th...
The sputtering yield of molybdenum under xenon ion bombardment was measured using a Quartz Crystal M...
In this paper we present the characterization of the sputtering behavior of a RF ion thruster (RIT-1...
Boron ultralow energy (0.2–3 keV) high dose (1E15 cm−2) implants in single crystalline Si (100) were...