Background and aims. Although microwave irradiation has been used for disinfection of dental stone casts, there are concerns regarding mechanical damage to casts during the process. The aim of this study was to evaluate the effect of microwave irradiation on the compressive strength (CS) and diametral tensile strength (DTS) of stone casts. Materials and methods. In this in vitro study, 80 cylindrical type III and IV stone models (20 × 40 mm) were prepared and divided into 8 groups of 10. The DTS and CS of the specimens were measured by a mechanical testing machine at a crosshead speed of 0.5 cm/min after 7 times of frequent wetting, irradiating at an energy level of 600 W for 3 minutes and cooling. Data were analyzed by Student’s t-te...
To verify the influence of repeated microwave disinfections on the shear bond strength of two commer...
This study evaluated the effect of disinfection methods [chemical disinfection (immersion in 100 ppm...
This study evaluated the cumulative effects of different microwave power levels on the physical prop...
Background and aims. Current chemical methods may not efficiently disinfect dental stone casts. The ...
Objectives: Dental practice contains the use of instruments and multiuse items that should be steril...
This is an Open Access article distributed under the terms of the Creative Commons Attribution Licen...
The type IV dental stone is widely used for the fabrication of dyes and master casts for fixed and r...
The type IV dental stone is widely used for the fabrication of dyes and master casts for fixed and r...
Objective: The disinfection of dental stone casts using microwave radiation has been shown, but dou...
This study evaluated the effect of microwave energy on the hardness, impact strength and flexural st...
Objectives: This study investigated the effect of microwave disinfection (650 W/6 min) on the flexur...
The aim of this study was to test and compare the effects of microwave irradiation on the dimensiona...
This study evaluated the effect of microwave energy on the hardness, impact strength and flexural st...
This study evaluated the influence of microwave disinfection on the strength of intact and relined d...
Dental gypsum stone is a product that often used in dentistry to make molds and models. Dental ston...
To verify the influence of repeated microwave disinfections on the shear bond strength of two commer...
This study evaluated the effect of disinfection methods [chemical disinfection (immersion in 100 ppm...
This study evaluated the cumulative effects of different microwave power levels on the physical prop...
Background and aims. Current chemical methods may not efficiently disinfect dental stone casts. The ...
Objectives: Dental practice contains the use of instruments and multiuse items that should be steril...
This is an Open Access article distributed under the terms of the Creative Commons Attribution Licen...
The type IV dental stone is widely used for the fabrication of dyes and master casts for fixed and r...
The type IV dental stone is widely used for the fabrication of dyes and master casts for fixed and r...
Objective: The disinfection of dental stone casts using microwave radiation has been shown, but dou...
This study evaluated the effect of microwave energy on the hardness, impact strength and flexural st...
Objectives: This study investigated the effect of microwave disinfection (650 W/6 min) on the flexur...
The aim of this study was to test and compare the effects of microwave irradiation on the dimensiona...
This study evaluated the effect of microwave energy on the hardness, impact strength and flexural st...
This study evaluated the influence of microwave disinfection on the strength of intact and relined d...
Dental gypsum stone is a product that often used in dentistry to make molds and models. Dental ston...
To verify the influence of repeated microwave disinfections on the shear bond strength of two commer...
This study evaluated the effect of disinfection methods [chemical disinfection (immersion in 100 ppm...
This study evaluated the cumulative effects of different microwave power levels on the physical prop...