Presented paper deals with a comparison of two internally mixing twin fluid atomizers. The well - known Y- jet atomizer and so called outside-in-liquid effervescent atomizer (OUIL) were investigated. The working regimes were defined by the pressure drop (Δp) and the gas to the liquid ratio (GLR). The internal and the external two-phase flows of both atomizers were studied. The influence of the mixing mechanism on the internal flow was evaluated by the gas to the liquid momentum ratio (Φ). In advance, the stability of the separated flow (liquid film) was examined in term of the critical wavelength of the surface disturbances (λc). The external flow was observed by the high – speed camera. The influence of the basic forces on the deformation ...
The characteristics of twin-fluid atomization operating in the annular flow regime were studied expe...
An internal mixing twin-fluid atomizer used for the application of cavity wax in automotive engineer...
Effervescent atomizers are based on the mixing of gas with liquid prior to discharge. We describe th...
Presented paper deals with a comparison of two internally mixing twin fluid atomizers. The well - kn...
Presented paper focuses on spraying of two viscous liquids (μ = 60 and 143 mPa·s) by two types of tw...
The thermal usage of liquid fuels implies their combustion, which is a process strongly influenced b...
The effervescent atomizer is a well-established type of the twin-fluid nozzle with internal mixing o...
The paper contains the results of experimental studies on water atomization process in effervescent ...
Despite its wide industrial applications, the internal-mixing twin-fluid atomization suffers a major...
The present work comparably examines four different twin-fluid atomizers operated under the same op-...
AbstractA twin-fluid atomizer was designed and developed for fuel atomization. The droplet character...
In an effort to capture the complex evolving interface of internal and external flow in an effervesc...
The twin-fluid atomizer employing the cross-stream mixing arrangement for air and liquid prior to th...
The research work of the present study is focused on the detailed comparison of two external mixing ...
Twin fluid atomizers allow for two different spray forming modes, flow focusing and flow blurring, d...
The characteristics of twin-fluid atomization operating in the annular flow regime were studied expe...
An internal mixing twin-fluid atomizer used for the application of cavity wax in automotive engineer...
Effervescent atomizers are based on the mixing of gas with liquid prior to discharge. We describe th...
Presented paper deals with a comparison of two internally mixing twin fluid atomizers. The well - kn...
Presented paper focuses on spraying of two viscous liquids (μ = 60 and 143 mPa·s) by two types of tw...
The thermal usage of liquid fuels implies their combustion, which is a process strongly influenced b...
The effervescent atomizer is a well-established type of the twin-fluid nozzle with internal mixing o...
The paper contains the results of experimental studies on water atomization process in effervescent ...
Despite its wide industrial applications, the internal-mixing twin-fluid atomization suffers a major...
The present work comparably examines four different twin-fluid atomizers operated under the same op-...
AbstractA twin-fluid atomizer was designed and developed for fuel atomization. The droplet character...
In an effort to capture the complex evolving interface of internal and external flow in an effervesc...
The twin-fluid atomizer employing the cross-stream mixing arrangement for air and liquid prior to th...
The research work of the present study is focused on the detailed comparison of two external mixing ...
Twin fluid atomizers allow for two different spray forming modes, flow focusing and flow blurring, d...
The characteristics of twin-fluid atomization operating in the annular flow regime were studied expe...
An internal mixing twin-fluid atomizer used for the application of cavity wax in automotive engineer...
Effervescent atomizers are based on the mixing of gas with liquid prior to discharge. We describe th...