Add to ORKGThis paper presents an analysis of the solderability ITO ceramics (In2O3/SnO2). The soft active solder SnInAgeTi was used for the experiments. The solder was activated by power ultrasound in air without flux. An analysis of the interface of the phases between the solder and the ceramic was carried out in order to discover the ultrasonic impacts on the active metal and to identify the mechanism of the joint on the ceramic side
The study aimed at direct flux-free soldering of metal-ceramics composite (MMC) with a copper substr...
Sintered Al2O3 is brazed with 304 stainless steel (SS) using 97(Ag28Cu)3Ti active filler alloy at 10...
A pair of capacitance-type air-coupled ultrasonic transducers have been constructed that were capabl...
This paper presents an analysis of the solderability ITO ceramics (In2O3/SnO2). The soft active sold...
Purpose This study aims to solder AlN ceramics with a Cu substrate using an active type Sn-Ag-Ti s...
The aim of this research was to study the direct bonding of ceramic materials, mainly Al2O3 and sele...
The aim of this research was to characterize soldering alloys of the type Sn–Sb–Ti and to study the ...
This work deals with the effect of solder alloying with a small amount of lanthanum on joint formati...
Sn-Bi alloy is one of the representative low temperature type lead-free solders. However, the bondin...
This work deals with the effect of solder alloying with a small amount of lanthanum on joint formati...
At the moment the global market offers a variety of monolithic ceramics and ceramic matrix composite...
The aim of this research was to characterize soldering alloys of the type Sn-Sb-Ti and to study the ...
This thesis deals with problematic of lead – free soldering and consequent testing of mechanical cha...
The aim of the research was to characterize the soldering alloy In–Ag–Ti type, and to study the dire...
The aim of the research was to characterize the soldering alloy In–Ag–Ti type, and to study the dire...
The study aimed at direct flux-free soldering of metal-ceramics composite (MMC) with a copper substr...
Sintered Al2O3 is brazed with 304 stainless steel (SS) using 97(Ag28Cu)3Ti active filler alloy at 10...
A pair of capacitance-type air-coupled ultrasonic transducers have been constructed that were capabl...
This paper presents an analysis of the solderability ITO ceramics (In2O3/SnO2). The soft active sold...
Purpose This study aims to solder AlN ceramics with a Cu substrate using an active type Sn-Ag-Ti s...
The aim of this research was to study the direct bonding of ceramic materials, mainly Al2O3 and sele...
The aim of this research was to characterize soldering alloys of the type Sn–Sb–Ti and to study the ...
This work deals with the effect of solder alloying with a small amount of lanthanum on joint formati...
Sn-Bi alloy is one of the representative low temperature type lead-free solders. However, the bondin...
This work deals with the effect of solder alloying with a small amount of lanthanum on joint formati...
At the moment the global market offers a variety of monolithic ceramics and ceramic matrix composite...
The aim of this research was to characterize soldering alloys of the type Sn-Sb-Ti and to study the ...
This thesis deals with problematic of lead – free soldering and consequent testing of mechanical cha...
The aim of the research was to characterize the soldering alloy In–Ag–Ti type, and to study the dire...
The aim of the research was to characterize the soldering alloy In–Ag–Ti type, and to study the dire...
The study aimed at direct flux-free soldering of metal-ceramics composite (MMC) with a copper substr...
Sintered Al2O3 is brazed with 304 stainless steel (SS) using 97(Ag28Cu)3Ti active filler alloy at 10...
A pair of capacitance-type air-coupled ultrasonic transducers have been constructed that were capabl...