High quality boron-doped epitaxial layers grown at 200°C from SiF4/H2/Ar gas mixtures for emitter formation in crystalline silicon solar cells

Controlling the doping profile in solar cells emitter and front/back surface field is mandatory to reach high efficiencies. In the current state of the art, these doped layers are made by dopant diffusion at around 900°C, which implies potential temperature induced damages in the c-Si absorber and for which a precise control of doping is difficult. An alternative solution based on boron-doped epitaxial silicon layers grown by plasma-enhanced chemical vapor deposition (PECVD) from 200°C using SiF4/H2/Ar/B2H6 chemistry is reported. The structural properties of the doped and undoped epitaxial layers were assessed by spectroscopic ellipsometry (SE), high resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD). The incorporation of boron has been studied via plasma profiling time of flight mass spectrometry (PP-TOFMS) and secondary ion mass spectrometry (SIMS) measurements. The boron-doped epitaxial layers revealed excellent structural and electrical properties even for high carrier concentrations (>1019cm-3). Sheet resistances between 100 and 130 Ω/sq can been obtained depending on the thickness and the doping concentration, which is within the range of targeted values for emitters in c-Si solar cells. Electrochemical capacitance voltage (ECV) revealed a uniform doping profile around 3.1019 cm-3 and by comparing with SIMS measurement a doping efficiency around 50% has been found