Numerical Study on Self-Starting Performance of Darrieus Vertical Axis Turbine for Tidal Stream Energy Conversion

Self-starting performance is a key factor in the evaluation of a Darrieus straight-bladed vertical axis turbine. Most traditional studies have analyzed the turbine’s self-starting capability using the experimental and numerical data of the forced rotation. A 2D numerical model based on the computational fluid dynamics (CFD) software ANSYS-Fluent was developed to simulate the self-starting process of the rotor at constant incident water-flow velocities. The vertical-axis turbine (VAT) rotor is driven directly by the resultant torque generated by the water flow and system loads, including the friction and reverse loads of the generator. It is found that the incident flow velocity and the moment of inertia of the rotor have little effect on the averaged values of tip-speed ratios in the equilibrium stage under no-load conditions. In the system load calculations, four modes of the self-starting were found: stable equilibrium mode, unstable equilibrium mode, switch mode and halt mode. The dimensionless power coefficient in the simulations of passive rotation conditions is found to be, on average, 38% higher than those achieved in the simulations of forced rotation conditions