Add to ORKGThe paper presents results of impact energy effects on real welded specimens of fine-grained high-strength S960QL steel, and elaborates the dependence of real welded specimen hardness on heat input. Results are obtained through measuring of hardness HV 10 and by experimental Charpy V-notch test. V-notch on test tubes was moved for 0,5 mm from the fusion line in the heat affected zone
The paper presents research of weldability of microalloyed high strength steels TStE 420 and S960QL ...
Grade S690 has a much higher tensile strength than the common grades that is used in the industry. D...
The effect of welding on the mechanical properties of high and ultra-high strength tubes in hybrid s...
The paper presents results of impact energy effects on real welded specimens of fine-grained high-st...
The research objective was to test the parameters of real welding of the high-strength micro-alloyed...
This paper presents the results of weldability investigation on welded joints made of fine - grained...
The paper deals with research into dependence of hardness and impact energy of thermal cycle simulat...
Abstract Ultra-high strength steels (UHSS) have a determining role in construction and industry. Fu...
In the present study, the investigation of weldability of ultra-high strength steel has been present...
In this study, the mechanical properties of butt-welded thin plates made of S700, S960 and S1100 ste...
This paper elaborates results of hardness and impact energy of thermal cycle simulated specimens of ...
In this study, experiments were carried out to investigate the influence of welding on the strength ...
This study investigates the effect of pack carburization on hardness property of ASTM A516/516M-05 s...
Recently, high heat-input automatic welding process has been applied to welded structures. However, ...
Two aspects of various steels’ weldability are considered in this article. The theoretical part pres...
The paper presents research of weldability of microalloyed high strength steels TStE 420 and S960QL ...
Grade S690 has a much higher tensile strength than the common grades that is used in the industry. D...
The effect of welding on the mechanical properties of high and ultra-high strength tubes in hybrid s...
The paper presents results of impact energy effects on real welded specimens of fine-grained high-st...
The research objective was to test the parameters of real welding of the high-strength micro-alloyed...
This paper presents the results of weldability investigation on welded joints made of fine - grained...
The paper deals with research into dependence of hardness and impact energy of thermal cycle simulat...
Abstract Ultra-high strength steels (UHSS) have a determining role in construction and industry. Fu...
In the present study, the investigation of weldability of ultra-high strength steel has been present...
In this study, the mechanical properties of butt-welded thin plates made of S700, S960 and S1100 ste...
This paper elaborates results of hardness and impact energy of thermal cycle simulated specimens of ...
In this study, experiments were carried out to investigate the influence of welding on the strength ...
This study investigates the effect of pack carburization on hardness property of ASTM A516/516M-05 s...
Recently, high heat-input automatic welding process has been applied to welded structures. However, ...
Two aspects of various steels’ weldability are considered in this article. The theoretical part pres...
The paper presents research of weldability of microalloyed high strength steels TStE 420 and S960QL ...
Grade S690 has a much higher tensile strength than the common grades that is used in the industry. D...
The effect of welding on the mechanical properties of high and ultra-high strength tubes in hybrid s...