The results of a field study of surface film spreading on the sea surface are presented. The experiments were carried out in the coastal zone of the Black Sea in a wide range of wind speeds and wave conditions. Vegetable oil was used for preparing the surfactants. It was found that at moderate and strong wind speeds the slicks take on a shape similar to an ellipse and are orientated in the direction of the air flow. An increase in the speed of the spreading slick along its major axis with strong wind was discovered
Summary: This work presents the description of the procedure of modeling of light field above the se...
A spectrum of low-frequency (20–30 Hz) amplitude fluctuations of the ultrasonic (10 MHz) signal spec...
Material adsorbed to the surface of a fluid - for instance crude oil in the ocean, biological surfac...
AbstractThe results of a field study of surface film spreading on the sea surface are presented. The...
It is known that films on the sea surface can appear due to ship pollution, river and collector drai...
Since the late 1960s, various groups have investigated the influence of marine surface films on mech...
Natural surface film experiments in shallow offshore waters of the Baltic and Mediterranean Seas wer...
Seawater samples were collected using a technique that isolated the upper 0.15 mm of surface water. ...
The ultimate goal of the present investigation was the classification of organic surface films by de...
Photographs of the sea surface made from satellites and high-flying airplanes throughout the world c...
An artificial surface fihn of oleyl alcohol was produced in the North Sea off Sylt Island to investi...
The injection of surfactant solutions is a promising technique for enhanced oil recovery from sub-su...
The objective of this paper is to provide a simple extension of the much-used gravity spreading mode...
The spreading properties of several hydrocarbons (vegetable,engine, gear and crude oils) on distille...
The influence of spreading particles on the stability of thin liquid films was investigated. Due to ...
Summary: This work presents the description of the procedure of modeling of light field above the se...
A spectrum of low-frequency (20–30 Hz) amplitude fluctuations of the ultrasonic (10 MHz) signal spec...
Material adsorbed to the surface of a fluid - for instance crude oil in the ocean, biological surfac...
AbstractThe results of a field study of surface film spreading on the sea surface are presented. The...
It is known that films on the sea surface can appear due to ship pollution, river and collector drai...
Since the late 1960s, various groups have investigated the influence of marine surface films on mech...
Natural surface film experiments in shallow offshore waters of the Baltic and Mediterranean Seas wer...
Seawater samples were collected using a technique that isolated the upper 0.15 mm of surface water. ...
The ultimate goal of the present investigation was the classification of organic surface films by de...
Photographs of the sea surface made from satellites and high-flying airplanes throughout the world c...
An artificial surface fihn of oleyl alcohol was produced in the North Sea off Sylt Island to investi...
The injection of surfactant solutions is a promising technique for enhanced oil recovery from sub-su...
The objective of this paper is to provide a simple extension of the much-used gravity spreading mode...
The spreading properties of several hydrocarbons (vegetable,engine, gear and crude oils) on distille...
The influence of spreading particles on the stability of thin liquid films was investigated. Due to ...
Summary: This work presents the description of the procedure of modeling of light field above the se...
A spectrum of low-frequency (20–30 Hz) amplitude fluctuations of the ultrasonic (10 MHz) signal spec...
Material adsorbed to the surface of a fluid - for instance crude oil in the ocean, biological surfac...