Physical modeling of overtopping induced fluvial dike failure: effects of the channel flow and floodplain innundation

peer reviewedFluvial dikes have been constructed as flood defense structures, but their failure may lead to casualties and major damages in the protected areas. Flow overtopping is listed as the main cause of dike failure. An accurate assessment of the breach evolution is a prerequisite to a sound flood risk assessment and management. in contrast, the current knowledge of the physical processes involved in fluvial dike failure by overtopping remains highly fragmented. This paper presents experimental tests on the breaching of homogenous sand-dikes in a fluvial configuration, i.e. the flow is parallel to the longitudinal dike axis. Overtopping is initiated over a pilot notch at the dike crest. Experiments are performed for different inflow discharges in the main channel and under different levels of floodplain confinement. The transient evolution of the dike geometry is monitored using a laser profilometry technique. The detailed reconstruction of the breach formation and expansion provides key insights into the mechanisms involved in the failure of fluvial dikes. Results show that the breach development differs highly from experiments disregarding the flow parallel to the dike axis (i.e. frontal configuration) as in the fluvial configuration the breach develops mainly in the flow direction and the floodplain water level strongly conditions the breach horizontal and vertical extent