Add to ORKGVapor pressure, anode temperature, and inverse emission effects on thallium filled diode tested with...
Designs were formulated for four CW, millimeter wavelength traveling-wave tubes having high efficien...
Harmonic filter, electron gun, performance tests, and design of traveling wave tube amplifier for sp...
A brief survey is presented of areas of progress on traveling wave tube designs. Data demonstrates t...
Cathode emission is made to occur by heating entire structure to 600 C, and positive potential is ap...
Method for preventing deterioration of mixed oxide cathodes in low density gas tubes caused by ion b...
A low-cost, low-mass, electrically efficient, modular cathode/electron gun assembly has been develop...
The procedure for evaluating reliable sputter-free cold cathodes for carbon dioxide lasers is discus...
The cathode life test program sponsored by NASA Lewis Research Center at Watkins-Johnson Company has...
GaP/tungsten and GaP/platinum diode and tungsten/barium oxide phototube fabrication and testing in c...
Contains reports on six research projects.Office of Scientific Research and Development (OSRD) OEMsr...
A low cost, small size and mass, low heater power, durable high-performance barium dispenser thermio...
"October 16, 1952." "This report is based on a thesis submitted to the Department of Electrical Engi...
Design and operating characteristics of 100 watt, 50 percent efficient, S-band traveling wave tube f...
This program covers the initial design and development of a 75 watt, 60 GHz traveling-wave tube for ...
Vapor pressure, anode temperature, and inverse emission effects on thallium filled diode tested with...
Designs were formulated for four CW, millimeter wavelength traveling-wave tubes having high efficien...
Harmonic filter, electron gun, performance tests, and design of traveling wave tube amplifier for sp...
A brief survey is presented of areas of progress on traveling wave tube designs. Data demonstrates t...
Cathode emission is made to occur by heating entire structure to 600 C, and positive potential is ap...
Method for preventing deterioration of mixed oxide cathodes in low density gas tubes caused by ion b...
A low-cost, low-mass, electrically efficient, modular cathode/electron gun assembly has been develop...
The procedure for evaluating reliable sputter-free cold cathodes for carbon dioxide lasers is discus...
The cathode life test program sponsored by NASA Lewis Research Center at Watkins-Johnson Company has...
GaP/tungsten and GaP/platinum diode and tungsten/barium oxide phototube fabrication and testing in c...
Contains reports on six research projects.Office of Scientific Research and Development (OSRD) OEMsr...
A low cost, small size and mass, low heater power, durable high-performance barium dispenser thermio...
"October 16, 1952." "This report is based on a thesis submitted to the Department of Electrical Engi...
Design and operating characteristics of 100 watt, 50 percent efficient, S-band traveling wave tube f...
This program covers the initial design and development of a 75 watt, 60 GHz traveling-wave tube for ...
Vapor pressure, anode temperature, and inverse emission effects on thallium filled diode tested with...
Designs were formulated for four CW, millimeter wavelength traveling-wave tubes having high efficien...
Harmonic filter, electron gun, performance tests, and design of traveling wave tube amplifier for sp...