Add to ORKGCesium and cesium fluoride adsorption on refractory metal surface measured by thermionic emission and photoelectric scanning device
Because of a change in the NASA funding cycle, the present reporting period covers only the six mont...
A ray tracing modeling of the star tracker telescope for Gravity Probe was used to predict the chara...
Energy absorbing, structural elements having high specific energy absorption and low dielectric cons...
Design, fabrication, calibration, instrumentation, and operation of test converter to generate param...
Chemical analysis of blistered cones for performance evaluation of Thermo-lag material for entry hea...
The feasibility of dividing the 8-12 micrometer thermal infrared wavelength region into six spectral...
Molecular weight determination of polymers from angular dependence of light scatterin
The Long Duration Exposure Facility (LDEF) was composed of many separate experiments, some of which ...
The original research objective was to demonstrate the ability of optical fiber spectrometry to dete...
The stability of materials used in the space environment will continue to be a limiting technology f...
Perovskite oxide materials provide a chemically diverse pseudo cubic ABO3 platform that possesses a ...
Three ozone tape products from the Solar Backscatter Ultraviolet (SBUV) experiment aboard Nimbus 7 w...
Silicon tetrachloride and a reductant (sodium) will be injected into an arc heated mixture of hydrog...
Fabrication of three flat plate sections for silicon-germanium solar thermoelectric generato
This report describes the work performed on a one and a half year advance technology program to deve...
Because of a change in the NASA funding cycle, the present reporting period covers only the six mont...
A ray tracing modeling of the star tracker telescope for Gravity Probe was used to predict the chara...
Energy absorbing, structural elements having high specific energy absorption and low dielectric cons...
Design, fabrication, calibration, instrumentation, and operation of test converter to generate param...
Chemical analysis of blistered cones for performance evaluation of Thermo-lag material for entry hea...
The feasibility of dividing the 8-12 micrometer thermal infrared wavelength region into six spectral...
Molecular weight determination of polymers from angular dependence of light scatterin
The Long Duration Exposure Facility (LDEF) was composed of many separate experiments, some of which ...
The original research objective was to demonstrate the ability of optical fiber spectrometry to dete...
The stability of materials used in the space environment will continue to be a limiting technology f...
Perovskite oxide materials provide a chemically diverse pseudo cubic ABO3 platform that possesses a ...
Three ozone tape products from the Solar Backscatter Ultraviolet (SBUV) experiment aboard Nimbus 7 w...
Silicon tetrachloride and a reductant (sodium) will be injected into an arc heated mixture of hydrog...
Fabrication of three flat plate sections for silicon-germanium solar thermoelectric generato
This report describes the work performed on a one and a half year advance technology program to deve...
Because of a change in the NASA funding cycle, the present reporting period covers only the six mont...
A ray tracing modeling of the star tracker telescope for Gravity Probe was used to predict the chara...
Energy absorbing, structural elements having high specific energy absorption and low dielectric cons...