Topics
ethyleneChemical substance
Effects of ethylene oxide-Freon 12 decontamination and dry heat sterilization procedures on potential spacecraft polymeric material
Ethylene oxide concentration, humidity, time, and temperature parameters for large decontamination c...
Facility description and procedures for heat and ethylene oxide sterilization of spacecraft instrume...
This cooperative agreement was intended to investigate the effects of a space environment on the pro...
Effects of thermal sterilization, long term thermal vacuum exposure, and decontamination on spacecra...
Physical, mechanical, and electrical tests to determine the effects on polymeric products after expo...
Spacecraft polymeric material interactions during decontamination, sterilization, and thermal vacuum...
A continuous sterilization process using ethylene oxide was studied in comparison with a classical m...
Organic materials compatibility with ethylene oxide and Freon decontamination processe
Effects of thermal sterilization on polymeric products used on Ranger and Mariner spacecraf
Fabrication and test of polyethylene base material for heat sterilization resistance and for battery...
Materials intended for use in spacecraft are routinely tested at low pressures, and outgassed substa...
Of 350 materials screened for outgassing characteristics, 100 qualify within the limits of less than...
Decontamination of spacecraft components with ethylene oxide as function of parameters of gas concen...
The effects of dry heat sterilization for 92 hours at 135 ° C in flowing nitrogen and 200 hours of e...
Atomic oxygen erosion of polymers in low Earth orbit (LEO) poses a serious threat to spacecraft perf...
Ethylene oxide concentration, humidity, time, and temperature parameters for large decontamination c...
Facility description and procedures for heat and ethylene oxide sterilization of spacecraft instrume...
This cooperative agreement was intended to investigate the effects of a space environment on the pro...
Effects of thermal sterilization, long term thermal vacuum exposure, and decontamination on spacecra...
Physical, mechanical, and electrical tests to determine the effects on polymeric products after expo...
Spacecraft polymeric material interactions during decontamination, sterilization, and thermal vacuum...
A continuous sterilization process using ethylene oxide was studied in comparison with a classical m...
Organic materials compatibility with ethylene oxide and Freon decontamination processe
Effects of thermal sterilization on polymeric products used on Ranger and Mariner spacecraf
Fabrication and test of polyethylene base material for heat sterilization resistance and for battery...
Materials intended for use in spacecraft are routinely tested at low pressures, and outgassed substa...
Of 350 materials screened for outgassing characteristics, 100 qualify within the limits of less than...
Decontamination of spacecraft components with ethylene oxide as function of parameters of gas concen...
The effects of dry heat sterilization for 92 hours at 135 ° C in flowing nitrogen and 200 hours of e...
Atomic oxygen erosion of polymers in low Earth orbit (LEO) poses a serious threat to spacecraft perf...
Ethylene oxide concentration, humidity, time, and temperature parameters for large decontamination c...
Facility description and procedures for heat and ethylene oxide sterilization of spacecraft instrume...
This cooperative agreement was intended to investigate the effects of a space environment on the pro...
Add to ORKG