Add to ORKGCreep tests with titanium alloys, precipitation hardening stainless steels, and maraging steel
The transformation products for CD3MN cast duplex stainless steel (DSS) were investigated between th...
Microstructural investigations were conducted on undeformed samples of cemented WC-12% Co alloys and...
Directionally solidified (DS) MAR-M246+Hf was tested in tension and fatigue, at temperatures from 20...
Onset of creep stress measured for metallic materials subjected to constant loads at elevated temper...
Construction and operation of machine for measuring creep deformations in threshold regions of metal...
Marko's rapid solidification technology was applied to processing high strength aluminum alloys. Fou...
Various tests were conducted to determine the mechanical properties of 12 alloys that are commonly u...
The effects of alloy composition on the aqueous stress corrosion of titanium alloys were studied wit...
Tests were performed to determine low cycle fatigue and crack growth rate properties of one iron-bas...
The SAFT prismatic VOS Ni-Cd cells have been flown in geosynchronous orbit since 1977 and in low ear...
The Lehigh cantilever fatigue speciment was utilized for the study which encompassed the 5,000 to 10...
In order to reduce the overall weight in spaceborne electronic systems, a conventional metallic heat...
Biaxial creep strength of T-111 tantalum alloy tubing in high temperature, high vacuum environmen
Eleven structural steels in a variety of confitions were tested using the notched slow-bend, Naval R...
Tensile properties of five low-alloy and stainless steels under high heating rate and constant tempe...
The transformation products for CD3MN cast duplex stainless steel (DSS) were investigated between th...
Microstructural investigations were conducted on undeformed samples of cemented WC-12% Co alloys and...
Directionally solidified (DS) MAR-M246+Hf was tested in tension and fatigue, at temperatures from 20...
Onset of creep stress measured for metallic materials subjected to constant loads at elevated temper...
Construction and operation of machine for measuring creep deformations in threshold regions of metal...
Marko's rapid solidification technology was applied to processing high strength aluminum alloys. Fou...
Various tests were conducted to determine the mechanical properties of 12 alloys that are commonly u...
The effects of alloy composition on the aqueous stress corrosion of titanium alloys were studied wit...
Tests were performed to determine low cycle fatigue and crack growth rate properties of one iron-bas...
The SAFT prismatic VOS Ni-Cd cells have been flown in geosynchronous orbit since 1977 and in low ear...
The Lehigh cantilever fatigue speciment was utilized for the study which encompassed the 5,000 to 10...
In order to reduce the overall weight in spaceborne electronic systems, a conventional metallic heat...
Biaxial creep strength of T-111 tantalum alloy tubing in high temperature, high vacuum environmen
Eleven structural steels in a variety of confitions were tested using the notched slow-bend, Naval R...
Tensile properties of five low-alloy and stainless steels under high heating rate and constant tempe...
The transformation products for CD3MN cast duplex stainless steel (DSS) were investigated between th...
Microstructural investigations were conducted on undeformed samples of cemented WC-12% Co alloys and...
Directionally solidified (DS) MAR-M246+Hf was tested in tension and fatigue, at temperatures from 20...