Add to ORKGExtended abstract of a paper presented at Microscopy and Microanalysis 2012 in Phoenix, Arizona, USA, July 29 - August 2, 201
The reduction of solid nickel oxide by hydrogen forms the basis for a number of industrial processes...
Ni/CG40-cermet anodes with two different ratios of nickel and ceria-gadolinia-oxide were exposed to ...
Reduction of three industrial nickel oxides (Goro, Tokyo and Sinter 75) with a hydrogen bearing gas ...
In situ reduction of nickel oxide (NiO) particles is performed under 1.3mbar of hydrogen gas (H2) in...
Environmental transmission electron microscopy was used to characterize in situ the reduction and ox...
Environmental transmission electron microscopy was used to characterize in situ the reduction and ox...
Nickel/ceramic solid oxide fuel cell anodes exhibit a dimensional instability when experiencing a re...
Fundamental studies on the mechanisms and kinetics of reduction of dense synthetic nickel oxide have...
An alternative experimental technique for the investigation of the reduction of dense synthetic NiO ...
This paper presents the results of our work conducted on studying the differences in the reduction o...
Yttria stabilized zirconia with a nickel catalyst (Ni-YSZ) is the most developed, widely used cermet...
Fuel Cells comprise a broad range of technologies that offer more efficient ways of converting fuel ...
The reduction of solid metal oxide by hydrogen or hydrocarbon gases represents a class of reactions ...
International audienceSingle chamber solid oxide fuel cells (SCFC) are an alternative concept to tra...
Solid oxide fuel cells (SOFCs) are promising energy conversion devices, but their economic viability...
The reduction of solid nickel oxide by hydrogen forms the basis for a number of industrial processes...
Ni/CG40-cermet anodes with two different ratios of nickel and ceria-gadolinia-oxide were exposed to ...
Reduction of three industrial nickel oxides (Goro, Tokyo and Sinter 75) with a hydrogen bearing gas ...
In situ reduction of nickel oxide (NiO) particles is performed under 1.3mbar of hydrogen gas (H2) in...
Environmental transmission electron microscopy was used to characterize in situ the reduction and ox...
Environmental transmission electron microscopy was used to characterize in situ the reduction and ox...
Nickel/ceramic solid oxide fuel cell anodes exhibit a dimensional instability when experiencing a re...
Fundamental studies on the mechanisms and kinetics of reduction of dense synthetic nickel oxide have...
An alternative experimental technique for the investigation of the reduction of dense synthetic NiO ...
This paper presents the results of our work conducted on studying the differences in the reduction o...
Yttria stabilized zirconia with a nickel catalyst (Ni-YSZ) is the most developed, widely used cermet...
Fuel Cells comprise a broad range of technologies that offer more efficient ways of converting fuel ...
The reduction of solid metal oxide by hydrogen or hydrocarbon gases represents a class of reactions ...
International audienceSingle chamber solid oxide fuel cells (SCFC) are an alternative concept to tra...
Solid oxide fuel cells (SOFCs) are promising energy conversion devices, but their economic viability...
The reduction of solid nickel oxide by hydrogen forms the basis for a number of industrial processes...
Ni/CG40-cermet anodes with two different ratios of nickel and ceria-gadolinia-oxide were exposed to ...
Reduction of three industrial nickel oxides (Goro, Tokyo and Sinter 75) with a hydrogen bearing gas ...