Add to ORKGHeat-resistant alloys based on Ni-Cr system are widely used as alloys for the manufacture of rings, fasteners, turbine disks and other parts operating at temperatures up to 750 °C. To improve the properties of these alloys, these are additionally doped by Al, Ti, Mo and other elements
The relation between the aging time and the mechanical properties of the investigated steels was dem...
There has been carried out thermodynamic modeling of phase transformations of the Fe-Cr Ni alloy all...
The relation between the aging time and the mechanical properties of the investigated steels was dem...
Heat-resistant alloys based on Ni-Cr system are widely used as alloys for the manufacture of rings, ...
The introducing of boron in very small amounts (0,001 – 0,02 %) improves considerably wear resistanc...
The article presents the results the impact of heat treatment on iron-n ickel alloys with adding Mo,...
The article presents the results the impact of heat treatment on iron-n ickel alloys with adding Mo,...
There are considered the alloys of the Cr – Ni system with addition of iron, molybdenum and other al...
There are considered the alloys of the Cr – Ni system with addition of iron, molybdenum and other al...
A small amount of boron (0'0005 per cent minimum ) is successfully used in the United States as a ...
To enable the development of novel Fe–C–B–Cr and Fe–C–B–Cr–Mo cold work tool steels, the microstruct...
To enable the development of novel Fe–C–B–Cr and Fe–C–B–Cr–Mo cold work tool steels, the microstruct...
This research work studied the effect of boron additions (14, 33, 82, 126, and 214 ppm) on the hot d...
This research work studied the effect of boron additions (14, 33, 82, 126, and 214 ppm) on the hot d...
Relaxation phenomena have been studied in an Fe-25% Ni alloy containing up to 42 ppm boron and in tw...
The relation between the aging time and the mechanical properties of the investigated steels was dem...
There has been carried out thermodynamic modeling of phase transformations of the Fe-Cr Ni alloy all...
The relation between the aging time and the mechanical properties of the investigated steels was dem...
Heat-resistant alloys based on Ni-Cr system are widely used as alloys for the manufacture of rings, ...
The introducing of boron in very small amounts (0,001 – 0,02 %) improves considerably wear resistanc...
The article presents the results the impact of heat treatment on iron-n ickel alloys with adding Mo,...
The article presents the results the impact of heat treatment on iron-n ickel alloys with adding Mo,...
There are considered the alloys of the Cr – Ni system with addition of iron, molybdenum and other al...
There are considered the alloys of the Cr – Ni system with addition of iron, molybdenum and other al...
A small amount of boron (0'0005 per cent minimum ) is successfully used in the United States as a ...
To enable the development of novel Fe–C–B–Cr and Fe–C–B–Cr–Mo cold work tool steels, the microstruct...
To enable the development of novel Fe–C–B–Cr and Fe–C–B–Cr–Mo cold work tool steels, the microstruct...
This research work studied the effect of boron additions (14, 33, 82, 126, and 214 ppm) on the hot d...
This research work studied the effect of boron additions (14, 33, 82, 126, and 214 ppm) on the hot d...
Relaxation phenomena have been studied in an Fe-25% Ni alloy containing up to 42 ppm boron and in tw...
The relation between the aging time and the mechanical properties of the investigated steels was dem...
There has been carried out thermodynamic modeling of phase transformations of the Fe-Cr Ni alloy all...
The relation between the aging time and the mechanical properties of the investigated steels was dem...