Deformation and failure kinetics of iPP polymorphs

In this study, the mechanical performance of the different polymorphs of isotactic polypropylene, typically present in iPP crystallized under industrial processing conditions, is assessed. Different preparation strategies were used to obtain samples consisting of almost solely \u3b1, \u3b2, or \u3b3 crystals. X-Ray measurements were used to validate that the desired phase was obtained. The intrinsic true stress - true strain response of all individual phases was measured in uniaxial compression at several strain rates (deformation kinetics). Moreover, measurements were performed over a wide temperature range, covering the window in between the glass transition and the melting temperature. The relation between obtained yield stress and the strain rate is described with a modification of the Ree-Eyring model. Differences and similarities in the deformation kinetics of the different phases are presented and discussed. Furthermore, the presence of three deformation processes, acting in parallel, is revealed. The Ree-Eyring equation enables lifetime prediction for given thermal and mechanical conditions. These predictions were experimentally validated using constant load tests in uniaxial compression. \ua9 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017, 55, 729\u2013747