An Experimental Study to Improve the Casting Performance of Steel Grades Sensitive for Clogging

In this study, the goal is to optimize the process and to reduce the clogging tendency during the continuous casting process. The focus is on clogging when the refractory base material (RBM) in the SEN is in contact with the liquid steel. It is difficult or impossible to avoid non-metallic inclusions in the liquid steel, but by a selection of a good RBM in the SEN clogging can be reduced. Different process steps were evaluated during the casting process in order to reduce the clogging tendency. First, the preheating of the SEN was studied. The results showed that the SEN can be decarburized during the preheating process. In addition, decarburization of SEN causes a larger risk for clogging. Two types of plasma coatings were implemented to protect the RBM, to prevent reactions with the RBM, and to reduce the clogging tendency. Calcium titanate (CaTiO3) mixed with yttria stabilized zirconia (YSZ) plasma coatings were tested in laboratory and pilot plant trials, for casting of aluminium-killed low-carbon steels. For casting of cerium alloyed stainless steels, YSZ plasma coatings were tested in laboratory, pilot plant and industrial trials. The results showed that the clogging tendency was reduced when implementing both coating materials. It is also of importance to produce clean steel in order to reduce clogging. Therefore, the steel cleanliness in the tundish was studied experimentally. The result showed that inclusions originated from the slag, deoxidation products and tundish refractory and that they were present in the tundish as well as in the final steel product.VINNOV