Numerical and Experimental Studies of Deployment Dynamics of Space Webs and CubeSat Booms

In this thesis, experiments and simulations are performed to study the deployment dynamics of space webs and space booms, focusing on the deployment and stabilization phases of the space web and the behavior of the bi-stable tape spring booms after long-term stowage. The space web, Suaineadh, was launched onboard the sounding rocket REXUS-12 from the Swedish launch base Esrange in Kiruna on 19 March 2012. It served as a technology demonstrator for a space web. A reaction wheel was used to actively control the deployment and stabilization states of the 2×2 m2 space web. After ejection from the rocket, the web was deployed but entanglements occurred since the web did not start to deploy at the specified angular velocity. The deployment dynamics was reconstructed by simulations from the information recorded by inertial measurement units and cameras. Simulations show that if the web would have started to deploy at the specified angular velocity, the web would most likely have been deployed and stabilized in space by the motor, reaction wheel and controller used in the experiment. A modified control method was developed to stabilize the out-of-plane motions before or during deployment. New web arms with tape springs were proposed to avoid entanglements. A deployable booms assembly composed of four 1-m long bi-stable glass fiber tape springs was designed for the electromagnetically clean 3U CubeSat Small Explorer for Advanced Missions (SEAM). The deployment dynamics and reliability of the SEAM boom design after long-term stowage were tested by on-ground experiments. A simple analytical model was developed to predict the deployment dynamics and to assess the effects of the GOLS and the combined effects of friction, viscoelastic strain energy relaxation, and other factors that act to decrease the deployment force. In order to mitigate the viscoelastic effects and thus ensure self-deployment, different tape springs were designed, manufactured and tested. A numerical model was used to assess the long-term stowage effects on the deployment capability of bi-stable tape springs including the friction, nonlinear-elastic and viscoelastic effects. A finite element method was used to model a meter-class fully coiled bi-stable tape spring boom and verified by analytical models.QC 20170508SEA