Characterization of Rock Fracturing for Vertical Boreability

This is the final version of the article. Available from Elsevier via the DOI in this record.Boreability can be defined as the ability of a bore to penetrate a rock mass. Understanding the factors influencing boreability is critical for enhanced project planning and reduce geotechnical risk in an offshore shaft boring environment. Large diameter drills are used for offshore shaft boring, which can be up to 7 m in diameter, and therefore more akin to tunnel boring machines due to the scale of the excavation and extent of ground interaction. With increases in bore diameter, there is a need to properly define and evaluate the effect of the degree of rock mass fracturing on machine performance for improved estimates of boreability. Discrete Fracture Network (DFN) simulation has been used as an innovative approach for stochastic realisation of rock mass fracturing by determination of the P32 volumetric fracture intensity in the context of boreability. P32 shows positive trend to specific penetration (SP), with maximum SP being achieved at moderate to high fracturing levels (20 - 25m-1). However, in this case, P32 shows a similar positive trend to P10, but with peak SP appearing at higher intensity levels. Increased RQD values result in reduced SP, with peak SP reached at moderate fracturing levels, similar to P10.This research is part of a wider study into excavatability, funded by the Engineering and Physical Sciences Research Council (ESPRC) of the UK