This article presents results from measurements of hydroxide ion transport between a concrete and a floor screed of a lower alkalinity than the concrete. As many floor coverings and floor adhesives are sensitive to high alkaline conditions it is important to know how hydroxide ions are transported to be able to evaluate the long-term function of floor constructions. It was found that only minor transport of hydroxide ions occurs in the hygroscopic moisture range. One conclusion is therefore that a floor screed of lower alkalinity may protect sensitive floorings from the high alkalinity present in concrete
Traditionally, the material used for the form in reinforced concrete construction has been wood or s...
This article outlines an experimental and numerical study on compatibility between flooring material...
The possibility of the formation of an alkali-silicate reaction (ASR) is a crucial issue for the ser...
Hydroxide ion concentration at an interface between concrete and a self-levelling flooring compoun
ii In recent decades there has been an increasing interest in the indoor environment and its connect...
When resilient flooring is glued directly to a concrete surface there is a possibility that water ba...
There were two principal objectives for this thesis. The first was to develop a methodology and eval...
The report describes three investigations of emissions from alkali attack on adhesives and floorings...
Self-levelling flooring compounds (SLC) are used to level substrates (mainly concrete slabs) before ...
The present study concerns hydrophobic surface treatments with silane-based liquid and crème on the ...
Just as water/cement ratio is an important parameter controlling the strength of concrete, alkali/c...
Concrete possesses an intrinsic chloride binding capacity. Chloride ions from the environment bind w...
This paper chooses the apparent diffusion coefficient for OH− (hydroxyl ion) for concrete as an inde...
This study investigated the feasibility of using calcined layered double hydroxides (CLDHs) to preve...
Trabajo presentado en el International RILEM Conference on Advances in Construction Materials Throug...
Traditionally, the material used for the form in reinforced concrete construction has been wood or s...
This article outlines an experimental and numerical study on compatibility between flooring material...
The possibility of the formation of an alkali-silicate reaction (ASR) is a crucial issue for the ser...
Hydroxide ion concentration at an interface between concrete and a self-levelling flooring compoun
ii In recent decades there has been an increasing interest in the indoor environment and its connect...
When resilient flooring is glued directly to a concrete surface there is a possibility that water ba...
There were two principal objectives for this thesis. The first was to develop a methodology and eval...
The report describes three investigations of emissions from alkali attack on adhesives and floorings...
Self-levelling flooring compounds (SLC) are used to level substrates (mainly concrete slabs) before ...
The present study concerns hydrophobic surface treatments with silane-based liquid and crème on the ...
Just as water/cement ratio is an important parameter controlling the strength of concrete, alkali/c...
Concrete possesses an intrinsic chloride binding capacity. Chloride ions from the environment bind w...
This paper chooses the apparent diffusion coefficient for OH− (hydroxyl ion) for concrete as an inde...
This study investigated the feasibility of using calcined layered double hydroxides (CLDHs) to preve...
Trabajo presentado en el International RILEM Conference on Advances in Construction Materials Throug...
Traditionally, the material used for the form in reinforced concrete construction has been wood or s...
This article outlines an experimental and numerical study on compatibility between flooring material...
The possibility of the formation of an alkali-silicate reaction (ASR) is a crucial issue for the ser...