A low-weight aerosol sampler has been developed and tested. Internal losses for both sub-micron and large particles ( < 10 tam) are of the order of 5 %. The size fractionation patterns indicate that the sampler may be used to collect a separate respirable fraction in good agreement with the BMRC standard and a coarse fraction deternuned by the inlet design
A method has been developed to estimate average concentra-tions and size distributions with a miniat...
This paper presents a novel sampler for airborne nanoparticles (NPs). A synthetic aerosol is forced ...
For a field intercomparison of various widely used dust samplers, a reference instrument was needed....
This chapter describes a personal aerosol sampler with size fractionation and time resolution that g...
International standards establish criteria for size-selective aerosol sampling for industrial hygien...
International standards establish criteria for size-selective aerosol sampling for industrial hygien...
In the field of industrial hygiene, aerosol sampling science is important because it describes the p...
A cheap and small device for sampling atmospheric particulate matter (PM) has been recently develope...
Development and characterization of samplers whose performances mimic the inhalability of the human ...
We evaluated a newly developed Portable Aerosol Collector and Spectrometer (PACS) in the laboratory....
While personal aerosol samplers have been characterized primarily based on wind tunnel tests conduct...
Due to the character of the original source materials and the nature of batch digitization, quality ...
Three particle size fractions of airborne dust are defined in European and U. S. standards for healt...
The assessment of personal inhalable aerosol samplers in a controlled laboratory setting has not pre...
Aerosol-related health effects are strongly related to particle deposition in the human respiratory ...
A method has been developed to estimate average concentra-tions and size distributions with a miniat...
This paper presents a novel sampler for airborne nanoparticles (NPs). A synthetic aerosol is forced ...
For a field intercomparison of various widely used dust samplers, a reference instrument was needed....
This chapter describes a personal aerosol sampler with size fractionation and time resolution that g...
International standards establish criteria for size-selective aerosol sampling for industrial hygien...
International standards establish criteria for size-selective aerosol sampling for industrial hygien...
In the field of industrial hygiene, aerosol sampling science is important because it describes the p...
A cheap and small device for sampling atmospheric particulate matter (PM) has been recently develope...
Development and characterization of samplers whose performances mimic the inhalability of the human ...
We evaluated a newly developed Portable Aerosol Collector and Spectrometer (PACS) in the laboratory....
While personal aerosol samplers have been characterized primarily based on wind tunnel tests conduct...
Due to the character of the original source materials and the nature of batch digitization, quality ...
Three particle size fractions of airborne dust are defined in European and U. S. standards for healt...
The assessment of personal inhalable aerosol samplers in a controlled laboratory setting has not pre...
Aerosol-related health effects are strongly related to particle deposition in the human respiratory ...
A method has been developed to estimate average concentra-tions and size distributions with a miniat...
This paper presents a novel sampler for airborne nanoparticles (NPs). A synthetic aerosol is forced ...
For a field intercomparison of various widely used dust samplers, a reference instrument was needed....