With a view towards minimising energy demand for cooling and artificial lighting in buildings, this paper evaluates innovative shading devices and how they can balance a generous degree of control mastering seasonal natural light with thermal gains in a typical Mediterranean climate such as Malta. The study evaluates the potential success (or failure) of such shading devices, from both their aesthetic and functional perspectives, as part of a passive design strategy adopted by the architect. Through environmental design and solar geometry, experimental simulations were generated in architectural science modelling software package Ecotect© developed by Andrew Marsh. Moreover a novel computer model termed Solar Control© was developed by the a...
The control of solar radiation is a basic dimension of modern design in all different types of const...
The use of solar shading can have an important influence on the internal heat gains, especially in z...
In recent years, the growing awareness of the possibilities of biomimetic and adaptive materials in ...
Abstract With a view towards minimising energy demand for cooling and artificial lighting in buildin...
Modern well-insulated and highly glazed buildings experience increased overheating, even in cold cli...
The paper presents an analytical and experimental study on external solar shadings. The purpose is t...
Abstract In recent years, different types of solar shading devices have been proposed, depending on ...
peer reviewedBuilding envelopes should be responsive to boundary conditions changing in short-time, ...
Solar shading is one of the cheapest passive cooling techniques employed in hot climates and there i...
This paper presents a new workflow to optimize a fixed shading device to reduce thermal loads so tha...
The paper presents an analytical and experimental study on external solar shadings. The purpose is t...
European Cities are strongly affected by the Urban Heat Island effect and Climate change impacts in ...
At recent days, many architects tend to design buildings’ envelope with highly void ratio to insure ...
Improved insulation and glazing contribute to overheating in buildings, the incidence of which is ri...
The 2018/844 Energy Performance of Buildings Directive (EU) has widened the scope of appropriate des...
The control of solar radiation is a basic dimension of modern design in all different types of const...
The use of solar shading can have an important influence on the internal heat gains, especially in z...
In recent years, the growing awareness of the possibilities of biomimetic and adaptive materials in ...
Abstract With a view towards minimising energy demand for cooling and artificial lighting in buildin...
Modern well-insulated and highly glazed buildings experience increased overheating, even in cold cli...
The paper presents an analytical and experimental study on external solar shadings. The purpose is t...
Abstract In recent years, different types of solar shading devices have been proposed, depending on ...
peer reviewedBuilding envelopes should be responsive to boundary conditions changing in short-time, ...
Solar shading is one of the cheapest passive cooling techniques employed in hot climates and there i...
This paper presents a new workflow to optimize a fixed shading device to reduce thermal loads so tha...
The paper presents an analytical and experimental study on external solar shadings. The purpose is t...
European Cities are strongly affected by the Urban Heat Island effect and Climate change impacts in ...
At recent days, many architects tend to design buildings’ envelope with highly void ratio to insure ...
Improved insulation and glazing contribute to overheating in buildings, the incidence of which is ri...
The 2018/844 Energy Performance of Buildings Directive (EU) has widened the scope of appropriate des...
The control of solar radiation is a basic dimension of modern design in all different types of const...
The use of solar shading can have an important influence on the internal heat gains, especially in z...
In recent years, the growing awareness of the possibilities of biomimetic and adaptive materials in ...