AbstractVarious metal oxide materials have been actively investigated to improve energy efficiency as exhaust-catalyst as well as electrodes in electrochemical devices such as fuel cells, ceramic sensors, photo-catalyst etc. Ceria-based materials are of great interest due to their wide applications; such as redox or oxygen storage promoter in automotive catalyst and solid state conductor in fuel cells. Here we report redox and electrical properties for Ce1−xMxO2−δ (M = Ni, Cu, Co, Mn, Ti, Zr) by X-ray diffraction (XRD) and simultaneous thermo-gravimetric analysis (TGA). Among various system, Ce1−xCuxO2−δ and Ce1−xNixO2−δ indicated relatively reversible redox behavior, although Cu2+ and Ni2+ had limited solid solubility in CeO2. The enhancem...
CuO supported on CeO2 and Ce0.9X0.1O2, where X is Zr, La, Tb or Pr, were synthesized using nitrate p...
The common material design for solid-oxide fuel cells (SOFCs) is based on the cermet (ceramic-metal ...
Three-way catalysis (TWC) involves simultaneous removal of the three pollutants (i.e., CO, NOx, and ...
This work was supported by EPSRC (EP/I022570/1, EP/K015540/1, EP/I038950/1, EP/K021036/1).Various me...
AbstractVarious metal oxide materials have been actively investigated to improve energy efficiency a...
Metal-doped ceria (Ce1−xMxO2−δ) is an attractive redox-active material for thermo/electrochemical sy...
Thermal desorption and steady-state CO oxidation measurements were performed on model catalysts to g...
Abstract Several papers have showed that ceria is a good anode electrocatalyst for the direct oxidat...
Fuel cells, and in particular solid-oxide fuel cells (SOFCs), enable high-efficiency conversion of c...
Cerium(IV) oxide is one of the most important rare earth metal oxides owing to its high oxygen stora...
Solid Oxide Fuel Cells (SOFCs) are an important electrochemical power conversion device, due largely...
Redox cycles utilize the reversible oxygen release/uptake of cerium oxide in a variety of renewable ...
This work reports the synthesis of nanostructured Ce1-xNixO2-δ (x = 0.05, 0.1, 0.15 and 0.2) oxides ...
This paper describes the experimental studies of multi-component solid state electrolytes based on C...
Cerium oxide (ceria, CeO2) is a technologically important material for energy conversion application...
CuO supported on CeO2 and Ce0.9X0.1O2, where X is Zr, La, Tb or Pr, were synthesized using nitrate p...
The common material design for solid-oxide fuel cells (SOFCs) is based on the cermet (ceramic-metal ...
Three-way catalysis (TWC) involves simultaneous removal of the three pollutants (i.e., CO, NOx, and ...
This work was supported by EPSRC (EP/I022570/1, EP/K015540/1, EP/I038950/1, EP/K021036/1).Various me...
AbstractVarious metal oxide materials have been actively investigated to improve energy efficiency a...
Metal-doped ceria (Ce1−xMxO2−δ) is an attractive redox-active material for thermo/electrochemical sy...
Thermal desorption and steady-state CO oxidation measurements were performed on model catalysts to g...
Abstract Several papers have showed that ceria is a good anode electrocatalyst for the direct oxidat...
Fuel cells, and in particular solid-oxide fuel cells (SOFCs), enable high-efficiency conversion of c...
Cerium(IV) oxide is one of the most important rare earth metal oxides owing to its high oxygen stora...
Solid Oxide Fuel Cells (SOFCs) are an important electrochemical power conversion device, due largely...
Redox cycles utilize the reversible oxygen release/uptake of cerium oxide in a variety of renewable ...
This work reports the synthesis of nanostructured Ce1-xNixO2-δ (x = 0.05, 0.1, 0.15 and 0.2) oxides ...
This paper describes the experimental studies of multi-component solid state electrolytes based on C...
Cerium oxide (ceria, CeO2) is a technologically important material for energy conversion application...
CuO supported on CeO2 and Ce0.9X0.1O2, where X is Zr, La, Tb or Pr, were synthesized using nitrate p...
The common material design for solid-oxide fuel cells (SOFCs) is based on the cermet (ceramic-metal ...
Three-way catalysis (TWC) involves simultaneous removal of the three pollutants (i.e., CO, NOx, and ...