Determination of material properties using nanoindentation and multiple indenter tips

AbstractNanoindentation is a useful method to probe the material properties of a solid. Its effective use lies in interpreting the data collected from a nanoindentation experiment with an associated analytical/numerical solution of the corresponding problem configuration. In this paper, a parametric finite element study has been performed to develop a new procedure for extracting elastic–plastic properties of a material through nanoindentation experiments with a substantially improved accuracy for the elastic properties of a elastic–plastic solid. The procedure involves data collected through the use of two, different, nanoindenter tips. Non-dimensional functions were constructed for two different indenter geometries to show that test results from multiple indenters, when appropriately manipulated, deliver superior results, compared to using one indenter. The material was assumed to be an isotropic elastic–plastic solid with power law hardening. Friction between the indenter and the material was included in the cases studied. The ratio of yield strength to elastic modulus was assumed to be in the range 0.0005–0.02 and the hardening coefficient was assumed to be between 0 and 0.4. Poisson’s ratio was fixed at 0.3