Laboratory study on the mechanical behaviors of an anisotropic shale rock

AbstractShale gas is becoming an important energy source worldwide. The geomechanical properties of shale rocks can have a major impact on the efficiency of shale gas exploration. This paper studied the mineralogical and mechanical characteristics of a typical gas shale in Ohio, USA. Scanning electron microscope (SEM) with energy dispersive X-ray (EDX) analyses was employed to measure the microstructure and material composition of the shale rock. The anisotropic behaviors of shale rock, including compressive and tensile strengths, were experimentally measured. The characteristics of shale rock were also studied by nondestructive wave speed measurements. The shale demonstrated strong anisotropic behaviors with the tensile strengths perpendicular to the bedding plane around 300–360 times of that parallel to bedding plane. Results of ultrasonic tests indicated that both compression and shear wave velocities show strong anisotropic patterns. The compression wave speed was the smallest in the direction perpendicular to the bedding plane; while the shear wave speed was the smallest in the direction parallel to the bedding plane. The ratio of wave speed anisotropy is around 1.3–1.4 for compression wave; the ratio of shear wave speed anisotropy is larger and more diverse compared with the compression wave anisotropy. This might be related to the larger variability in the frictional adhesive strength along bedding plane than the compressive adhesive strength