AbstractApplying ultrashort laser pulses at wavelengths of 0.8μm and 1.03μm, the selective ablation of thin (∼100nm) SiO2 layers from silicon wafers has been investigated. In particular, the effects of different pulse durations down to a minimum value of 50 fs, and single– as well as multi-pulse irradiation have been studied. Selective removal of the dielectric layer without any visible damage of the opened Si wafer was only possible with single pulse ablation. The threshold fluence for such complete ablation of the dielectric layer increases with increasing pulse duration. Irradiating two or more pulses on the same spot, significantly corrupted ablation craters are produced. The physical ablation mechanisms will be discussed with respect t...
Application of picosecond and femtosecond laser pulses to the controlled ablation of materials repre...
We report experiments on the ablation of arsenic trisulphide and silicon using high-repetition-rate ...
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://...
AbstractApplying ultrashort laser pulses at wavelengths of 0.8μm and 1.03μm, the selective ablation ...
The process of ultrashort laser-assisted selective removal of thin dielectric layers from silicon su...
The microstructural impact of selective femtosecond laser ablation of thin dielectric layers from mo...
AbstractIn the production process of microelectronic devices and high efficiency solar cells, local ...
The micro processing of materials using ultra short pulse (USP) lasers with durations in the low pic...
AbstractLaser ablation of silicon is investigated with a large set of laser parameters to determine ...
AbstractIn this work SiNX deposited on silicon was locally ablated using laser irradiation. The focu...
AbstractLaser ablation of dielectrics from silicon substrates represents a useful technique for e.g....
AbstractLaser ablation of dielectric layers offers a low cost and contact free structuring method fo...
AbstractSurface damage morphologies were studied by irradiating with pulses (fluence of 1.13J/cm2) i...
We report on an experimental investigation of ultrafast laser ablation of silicon with bursts of pul...
Ultra-short pulsed laser radiation has been shown to be effective for precision materials processing...
Application of picosecond and femtosecond laser pulses to the controlled ablation of materials repre...
We report experiments on the ablation of arsenic trisulphide and silicon using high-repetition-rate ...
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://...
AbstractApplying ultrashort laser pulses at wavelengths of 0.8μm and 1.03μm, the selective ablation ...
The process of ultrashort laser-assisted selective removal of thin dielectric layers from silicon su...
The microstructural impact of selective femtosecond laser ablation of thin dielectric layers from mo...
AbstractIn the production process of microelectronic devices and high efficiency solar cells, local ...
The micro processing of materials using ultra short pulse (USP) lasers with durations in the low pic...
AbstractLaser ablation of silicon is investigated with a large set of laser parameters to determine ...
AbstractIn this work SiNX deposited on silicon was locally ablated using laser irradiation. The focu...
AbstractLaser ablation of dielectrics from silicon substrates represents a useful technique for e.g....
AbstractLaser ablation of dielectric layers offers a low cost and contact free structuring method fo...
AbstractSurface damage morphologies were studied by irradiating with pulses (fluence of 1.13J/cm2) i...
We report on an experimental investigation of ultrafast laser ablation of silicon with bursts of pul...
Ultra-short pulsed laser radiation has been shown to be effective for precision materials processing...
Application of picosecond and femtosecond laser pulses to the controlled ablation of materials repre...
We report experiments on the ablation of arsenic trisulphide and silicon using high-repetition-rate ...
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://...