Effect of Limestone Fillers the Physic-Mechanical Properties of Limestone Concrete

AbstractThis work focuses on the exploitation of local industrial wastes and their use in the formulation of new concretes which can be used in local constructions. The valorised materials are limestone crushing sand (0/5mm) and limestone fillers (80μm). The two materials are extracted from local aggregate crushing wastes. Thus, and since the used gravels are also of limestone nature, the formulated composite is a limestone concrete. So this study constitutes an experimental work that aims at the study of the effect of the addition of limestone fillers on the physico-mechanical behaviour of limestone concrete. To carry out this study, different proportions of fillers ranging from 0 to 40% were considered. Very important results have been achieved on the workability and strength. By increasing the amount of limestone filler in concrete, the first one improves, but the second one increases then decreases passing by an optimal content of fillers which gives a maximum mechanical strength. Finally, and concerning the dimensional variations, it is noteworthy that they decrease at the beginning till an optimal value of fillers content, but beyond this optimum, they start increasing without exceeding recommended values