Effect of Granule Sizes on the Performance of Upflow Anaerobic Sludge Blanket (UASB) Reactors for Cassava Wastewater Treatment

AbstractThe laboratory-scale UASB reactors were operated at five different hydraulic retention times (HRTs). The various sizes of granules from three different sources: a cassava factory (CS), a seafood factory (SS), and a palm oil mill (PS), having the size range of 1.5-1.7mm, 0.7-1.0mm and 0.1-0.2mm. respectively, were used as inocula for anaerobic digestion of cassava wastewater. For comparison, the first reactor with only granules from its own source (R1, CS) was treated as control. The other two reactors were inoculated with mixed granules from different sources (R2, CS+SS and R3, CS+PS). As HRT decreased from 5 days to 1 day, the organic removal efficiencies decreased from 91.49 to 43.23%, 89.36 to 45.13% and 87.23 to 32.69% for R1, R2 and R3 respectively (or inversely with increasing OLR). In this study selected mathematical models including Monod, Contois, Grau second-order and Modified Stover-Kicannon kinetic models were applied to determine the substrate removal kinetics of UASB reactors. Kinetic parameters were determined through linear regression using experimental data obtained from the steady-state experiments and subsequently used to predict effluent COD. The results showed that Grau second-order and Modified Stover-Kicannon kinetic models were more suitable than the others for predicting the substrate removal for all different sizes of granules. In addition the Upflow Anaerobic Sludge Blanket (UASB) reactor with only granules from a cassava factory gave the best performance