AbstractThe effect of incorporating alkaline nitrates in hydrotalcites for use in the combustion of particulate matter from diesel emissions has been studied. The catalysts were characterised by X-ray diffraction (XRD), N2 adsorption, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), elemental analysis (EA), atomic absorption spectrophotometry (AAS) temperature programmed reduction (TPR) and Fourier transform infrared spectroscopy (FTIR). Activity measurements were carried out using a thermobalance in air and using a fixed-bed reactor with a NO/O2 flow. The observed activities decreased in the following order: HTMgAlcCs>HTMgAlcK>HTMgAlcLi>HTMgAlc
Abstract1%wt Pt was impregnated on CuZnAl calcined hydrotalcite-type precursors with three Cu/Zn ato...
Mg:Al 3:1 hydrotalcite (Ht), used in catalytic quantities, promotes the generation of nitrosoalkenes...
Orientador: Renato SprungTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenhar...
The effect of incorporating alkaline nitrates in hydrotalcites for use in the combustion of particul...
AbstractThe effect of incorporating alkaline nitrates in hydrotalcites for use in the combustion of ...
In this work, a series of Cu-Mg-Al hydrotalcites and the oxide mixture obtained by their calcination...
The deactivation of supported catalysts CsNO3 and LiNO3 for diesel soot combustion is studied in thi...
Mg-Al hydrotalcite coatings have been grown on alumina via a novel alkali- and nitrate-free impregna...
In order to explore a method to remove particulate matter, catalysts of different alkaline nitrates ...
102-109The use of Mg-Al Hydrotalcite for removing anionic contaminants such as Bromide, Sulphate, Ni...
The catalytic combustion of diesel soot was studied in the presence of fresh and aged catalysts: Co/...
Hydrotalcite-like materials containing apart from magnesium and aluminum also copper, cobalt, nickel...
[EN]This study describes the synthesis of hydrotalcite-like materials by the co-precipitation method...
Five hydrotalcites with Mg/Al molar ratio range of 3-15 were prepared. The structure and basicity of...
AbstractHydrotalcites are double layered lamellar clays. It has high surface area and different type...
Abstract1%wt Pt was impregnated on CuZnAl calcined hydrotalcite-type precursors with three Cu/Zn ato...
Mg:Al 3:1 hydrotalcite (Ht), used in catalytic quantities, promotes the generation of nitrosoalkenes...
Orientador: Renato SprungTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenhar...
The effect of incorporating alkaline nitrates in hydrotalcites for use in the combustion of particul...
AbstractThe effect of incorporating alkaline nitrates in hydrotalcites for use in the combustion of ...
In this work, a series of Cu-Mg-Al hydrotalcites and the oxide mixture obtained by their calcination...
The deactivation of supported catalysts CsNO3 and LiNO3 for diesel soot combustion is studied in thi...
Mg-Al hydrotalcite coatings have been grown on alumina via a novel alkali- and nitrate-free impregna...
In order to explore a method to remove particulate matter, catalysts of different alkaline nitrates ...
102-109The use of Mg-Al Hydrotalcite for removing anionic contaminants such as Bromide, Sulphate, Ni...
The catalytic combustion of diesel soot was studied in the presence of fresh and aged catalysts: Co/...
Hydrotalcite-like materials containing apart from magnesium and aluminum also copper, cobalt, nickel...
[EN]This study describes the synthesis of hydrotalcite-like materials by the co-precipitation method...
Five hydrotalcites with Mg/Al molar ratio range of 3-15 were prepared. The structure and basicity of...
AbstractHydrotalcites are double layered lamellar clays. It has high surface area and different type...
Abstract1%wt Pt was impregnated on CuZnAl calcined hydrotalcite-type precursors with three Cu/Zn ato...
Mg:Al 3:1 hydrotalcite (Ht), used in catalytic quantities, promotes the generation of nitrosoalkenes...
Orientador: Renato SprungTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenhar...