AbstractIn this study, the effect of strontium addition on hot deformation of AZ61 alloy was investigated by hot compression tests. A reference alloy (AZ61) and an Sr-containing alloy (AZ61 + Sr) was cast while their average initial grain size were supposed to be about 140 and 40 µm, respectively. In AZ61 + Sr alloy, the Sr-containing precipitations were stable at homogenization temperature. Analysing the hot compression curves, it was revealed that dynamic recrystallization phenomenon had occurred and controlled the thermomechanical behaviour of the alloys. The derived constitutive equations showed that the hot deformation parameters (n and Q) in AZ61 + Sr alloy is smaller than those of AZ61 alloy; this can be related to the small initial ...
AbstractIn this study, the hyperbolic-sine type constitutive equation was used to model the flow str...
International audienceThis study was conducted to compare the development of microstructures of Mg-3...
The effect of initial grain size on dynamically recrystallized grain size (DRX grain size) is examin...
AbstractIn this study, the effect of strontium addition on hot deformation of AZ61 alloy was investi...
In this study, the effect of strontium addition on hot deformation of AZ61 alloy was investigated by...
AbstractHot compression deformation was exerted on AZ31 magnesium alloy from 200°C to 420°C with the...
The research investigates the hot deformation behaviour of the AZ80 alloy, with special emphasis on ...
High-temperature plastic deformation and dynamic recrystallization were investigated in an extruded ...
Alloy 825 is widely used in several industries, but its useful service life is limited by both mecha...
This study investigated the dynamic recrystallization (DRX) mechanism and hot-deformation behavior o...
The present study aimed at characterizing the flow characteristics and workability of an as-extruded...
High temperature regime, 300-450?C for Mg-Al-Zn alloys, is currently used in primary processing, suc...
he microstructural evolution is examined during the hot compression of magnesium alloy AZ31 for both...
The deformation and dynamic recrystallization behavior of magnesium alloy AZ61 were studied at 623 K...
Kinetics of the dynamic, as well as postdynamic recrystallization of the wrought magnesium alloy AZ3...
AbstractIn this study, the hyperbolic-sine type constitutive equation was used to model the flow str...
International audienceThis study was conducted to compare the development of microstructures of Mg-3...
The effect of initial grain size on dynamically recrystallized grain size (DRX grain size) is examin...
AbstractIn this study, the effect of strontium addition on hot deformation of AZ61 alloy was investi...
In this study, the effect of strontium addition on hot deformation of AZ61 alloy was investigated by...
AbstractHot compression deformation was exerted on AZ31 magnesium alloy from 200°C to 420°C with the...
The research investigates the hot deformation behaviour of the AZ80 alloy, with special emphasis on ...
High-temperature plastic deformation and dynamic recrystallization were investigated in an extruded ...
Alloy 825 is widely used in several industries, but its useful service life is limited by both mecha...
This study investigated the dynamic recrystallization (DRX) mechanism and hot-deformation behavior o...
The present study aimed at characterizing the flow characteristics and workability of an as-extruded...
High temperature regime, 300-450?C for Mg-Al-Zn alloys, is currently used in primary processing, suc...
he microstructural evolution is examined during the hot compression of magnesium alloy AZ31 for both...
The deformation and dynamic recrystallization behavior of magnesium alloy AZ61 were studied at 623 K...
Kinetics of the dynamic, as well as postdynamic recrystallization of the wrought magnesium alloy AZ3...
AbstractIn this study, the hyperbolic-sine type constitutive equation was used to model the flow str...
International audienceThis study was conducted to compare the development of microstructures of Mg-3...
The effect of initial grain size on dynamically recrystallized grain size (DRX grain size) is examin...