AbstractAn fF-level capacitive sensor, intended for pL liquid measurements, has been fabricated with MEMS technology and successfully characterized. The sensor measures liquid level variations in a microfluidic channel. The sensor’s capacitance varies from 1.5 fF (channel empty) to 12.8fF (channel filled with 63 pL of water). To reliably detect such small capacitance changes, a low noise measurement system, based on a lock-in amplifier, was implemented. The measured sensitivity of the system is 14.1 mV/fF, and the capacitance detection limit is 0.057 aF/Hz1/2, which corresponds to a volumetric resolution of about 0.22 fL/Hz1/2
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
AbstractAn fF-level capacitive sensor, intended for pL liquid measurements, has been fabricated with...
The development of two types of microelectromechanical systems (MEMS) using a capacitive detection m...
The development of two types of microelectromechanical systems (MEMS) using a capacitive detection m...
This paper presents a silicon MEMS capacitive structure to investigate a test methodology for fF-lev...
AbstractThe paper reports a capacitive sensor for measuring liquid level which was fully fabricated ...
In this thesis, the application of capacitive sensing technology in liquid level monitoring will be ...
AbstractThe paper reports a capacitive sensor for measuring liquid level which was fully fabricated ...
We have demonstrated an entire series of capacitive sensors using a multi-layer parylene/photoresist...
We have demonstrated an entire series of capacitive sensors using a multi-layer parylene/photoresist...
AbstractThe design, fabrication and integration of capacitive void fraction sensors for microfluidic...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
AbstractAn fF-level capacitive sensor, intended for pL liquid measurements, has been fabricated with...
The development of two types of microelectromechanical systems (MEMS) using a capacitive detection m...
The development of two types of microelectromechanical systems (MEMS) using a capacitive detection m...
This paper presents a silicon MEMS capacitive structure to investigate a test methodology for fF-lev...
AbstractThe paper reports a capacitive sensor for measuring liquid level which was fully fabricated ...
In this thesis, the application of capacitive sensing technology in liquid level monitoring will be ...
AbstractThe paper reports a capacitive sensor for measuring liquid level which was fully fabricated ...
We have demonstrated an entire series of capacitive sensors using a multi-layer parylene/photoresist...
We have demonstrated an entire series of capacitive sensors using a multi-layer parylene/photoresist...
AbstractThe design, fabrication and integration of capacitive void fraction sensors for microfluidic...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...
Property of fluid and material compatibility limit the level sensor's fabrication, dynamic range and...