AbstractThe European CO2 Test Centre Mongstad project will construct two post-combustion CO2 capture test plants (amine and chilled ammonia) with total annual CO2 capacity of 100,000 tones. The ambitions are: •Develop technologies for CO2 capture capable of wide national and international deployment•Reduce cost and technical, environmental and financial risks related to large scale CO2 capture•Test, verify and demonstrate CO2 capture technology owned and marketed by vendors•Encourage the development of a market for such technology Both plants will be able to capture CO2 from two different flue gases with 3.5 and 12.9 mol% CO2
AbstractThe CO2 Capture Project (CCP) is an award-winning partnership of seven major energy companie...
AbstractThe performance of post-combustion CO2 capture processes depends on the applied solvent as w...
AbstractIn phase I of their joint development programme BASF, Linde and RWE Power have successfully ...
AbstractThe European CO2 Test Centre Mongstad project will construct two post-combustion CO2 capture...
AbstractThe CO2 Technology Centre Mongstad (TCM) is currently regarded as the largest CO2 capture te...
AbstractThe CO2 Technology Centre Mongstad (TCM) project is constructing two large post-combustion C...
AbstractThe CO2 Technology Centre Mongstad (TCM) is currently regarded as the world's largest CO2 ca...
AbstractAccording to the latest IEA report, Carbon Capture and Storage (CCS) from fossil fuel fired ...
AbstractThis paper lays out a generic CO2 capture testing methodology that has been applied at multi...
CO2 Technology Centre Mongstad (TCM) houses a demonstration-scale test facility for CO2 capture solv...
AbstractCO2 capture from pressurized flue gas using a variation of the hot potassium carbonate proce...
AbstractThe Norwegian full scale CO2 capture project Mongstad (CCM) gained extensive knowledge and e...
AbstractA post-combustion amine based CO2 capture plant is associated with minor release of amine an...
AbstractDoosan Power Systems are developing competitive Post Combustion CO2 Capture (PCC) technologi...
AbstractFluor and E.ON have built a carbon dioxide recovery pilot plant using Fluor's proprietary Ec...
AbstractThe CO2 Capture Project (CCP) is an award-winning partnership of seven major energy companie...
AbstractThe performance of post-combustion CO2 capture processes depends on the applied solvent as w...
AbstractIn phase I of their joint development programme BASF, Linde and RWE Power have successfully ...
AbstractThe European CO2 Test Centre Mongstad project will construct two post-combustion CO2 capture...
AbstractThe CO2 Technology Centre Mongstad (TCM) is currently regarded as the largest CO2 capture te...
AbstractThe CO2 Technology Centre Mongstad (TCM) project is constructing two large post-combustion C...
AbstractThe CO2 Technology Centre Mongstad (TCM) is currently regarded as the world's largest CO2 ca...
AbstractAccording to the latest IEA report, Carbon Capture and Storage (CCS) from fossil fuel fired ...
AbstractThis paper lays out a generic CO2 capture testing methodology that has been applied at multi...
CO2 Technology Centre Mongstad (TCM) houses a demonstration-scale test facility for CO2 capture solv...
AbstractCO2 capture from pressurized flue gas using a variation of the hot potassium carbonate proce...
AbstractThe Norwegian full scale CO2 capture project Mongstad (CCM) gained extensive knowledge and e...
AbstractA post-combustion amine based CO2 capture plant is associated with minor release of amine an...
AbstractDoosan Power Systems are developing competitive Post Combustion CO2 Capture (PCC) technologi...
AbstractFluor and E.ON have built a carbon dioxide recovery pilot plant using Fluor's proprietary Ec...
AbstractThe CO2 Capture Project (CCP) is an award-winning partnership of seven major energy companie...
AbstractThe performance of post-combustion CO2 capture processes depends on the applied solvent as w...
AbstractIn phase I of their joint development programme BASF, Linde and RWE Power have successfully ...