An Experimental Investigation of Wind Effect on Pentagonal and Hexagonal Staggered Cylinders

AbstractIn this research work, an experimental investigation of wind effect on pentagonal and hexagonal staggered cylinders was carried out. The study was performed on the group consisting of three cylinders, arranged in staggered form, one pentagonal cylinder in the upstream and another two hexagonal cylinder in the downstream side. The test was conducted in an open circuit wind tunnel at a Reynolds number of 4.22 x 104 based on the face width of the cylinder across the flow direction in a uniform flow velocity of 13.5 m/s. The group of three cylinders was taken into consideration for the study and the surface static pressures were measured for various transverse spacing of 2D, 3D, 5D and longitudinal spacing of 1D, 2D, 4D, 6D, 8D, where D is the width of the cylinder across the flow direction. The surface static pressures at the different locations of the cylinder were measured with the help of inclined multi-manometers. The pressure coefficients were calculated from the measured values of the surface static pressure distribution on the cylinder. Later the drag and lift coefficients were obtained from the pressure coefficients by the numerical integration method. The results will enable the engineers and architects to design buildings more efficiently. Since the results will be expressed in the non-dimensional form they may be applied for the prototype building