Improved log rotation using information from a computed tomography scanner

AbstractThe development of an industrial computed tomography scanner for the sawmilling industry raises the question of how to find a production strategy that uses a computed tomography scanner in the sawmill production line to its full potential. This study was focused on a Scandinavian sawmill processing Scots pine (Pinus sylvestris) and Norway spruce (Picea abies). The potential value increase when allowing an alternative log rotation other than the horns down position was investigated using a log breakdown simulation. The resulting data was analysed with respect to the size of the log rotational step, an introduced rotational error of the sawing machine and different price differences between the quality grades. It was also of interest to define the outer log properties that characterise the logs sawn for the greatest profit return close to the horns down position compared to logs sawn for a greater profit return in a different log rotation. Such characteristics can be used to reduce the number of degrees of freedom in an optimisation and consider instead other parameters, such as positioning and sawing pattern. Other defects such as pitch pockets, splits and rot are also of interest. The results shows that there is a potential value increase when applying the log rotation that maximises the value for each log instead of processing all logs in the horns down position. However, the potential value increase depends on the rotational error of the used sawing machine and the price differences between the quality grades. The log properties that differ between logs sawn for the greatest profit return close to the horns down position compared to a different log rotation are the bow height and the log taper. Unfortunately, predictability of log rotation for greatest profit return based on the outer properties of logs is poor. It is not possible to differentiate logs which would be sawn for the greatest profit return close to the horns down position from those where a different log rotation results in the greatest profit return, based only on their outer properties