AbstractThis paper describes the modeling of polarization curves not exhibiting a Tafel region using Excel spreadsheets. Carbon steel in aerated NaCl unbuffered solutions was studied applying a linear potential sweep technique. Current–potential curves were obtained from linear potential sweep at a rate of 10mVs−1 in un-buffered 0.1, 0.4 and 0.9M NaCl solutions, at a constant temperature of 25°C and potential sweeps that were conducted in a potential range −1.0 to 0.4V vs. Ag/AgCl
The Tafel equation, which serves as a linearized representation of the Butler-Volmer expression, per...
The effect of nonstirred aqueous Portland cement solution on the corrosion rates of zinc and cadmium...
This study has examined the pitting tendency of A-470, GFA and S231 turbine rotor disc low alloy ste...
AbstractThis paper describes the modeling of polarization curves not exhibiting a Tafel region using...
Publicación ISICorrosion of carbon steel in un-buffered NaCl solutions was studied applying linear p...
The objective of this investigation was to compare the galvanic corrosion rate of carbon steel C1018...
The corrosion rate of a metal (alloy) can be measured using: (1) Immersion tests or weight loss such...
AbstractSeveral experimental measurements are expressed in the form of one-dimensional profiles, for...
ABSTRACT: Tafel polarisation method is widely used in corrosion studies but relies heavily on the ac...
The general corrosion rate may be measured using immersion tests or electrochemical tests. Electroch...
Tafel polarisation method is widely used in corrosion studies but relies heavily on the accurate ext...
A practical anodic and cathodic curve intersection model, which consisted of an apparent anodic curv...
This work is an extension of studies into the mechanism of inhibition of a carbon steel by a non-tox...
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposi...
Software for running a cyclic current reversal polarization voltammagram has been developed for use ...
The Tafel equation, which serves as a linearized representation of the Butler-Volmer expression, per...
The effect of nonstirred aqueous Portland cement solution on the corrosion rates of zinc and cadmium...
This study has examined the pitting tendency of A-470, GFA and S231 turbine rotor disc low alloy ste...
AbstractThis paper describes the modeling of polarization curves not exhibiting a Tafel region using...
Publicación ISICorrosion of carbon steel in un-buffered NaCl solutions was studied applying linear p...
The objective of this investigation was to compare the galvanic corrosion rate of carbon steel C1018...
The corrosion rate of a metal (alloy) can be measured using: (1) Immersion tests or weight loss such...
AbstractSeveral experimental measurements are expressed in the form of one-dimensional profiles, for...
ABSTRACT: Tafel polarisation method is widely used in corrosion studies but relies heavily on the ac...
The general corrosion rate may be measured using immersion tests or electrochemical tests. Electroch...
Tafel polarisation method is widely used in corrosion studies but relies heavily on the accurate ext...
A practical anodic and cathodic curve intersection model, which consisted of an apparent anodic curv...
This work is an extension of studies into the mechanism of inhibition of a carbon steel by a non-tox...
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposi...
Software for running a cyclic current reversal polarization voltammagram has been developed for use ...
The Tafel equation, which serves as a linearized representation of the Butler-Volmer expression, per...
The effect of nonstirred aqueous Portland cement solution on the corrosion rates of zinc and cadmium...
This study has examined the pitting tendency of A-470, GFA and S231 turbine rotor disc low alloy ste...