AbstractThe paper presents the results of investigations concerning measurements of the refractive index and the thickness of planar waveguide structures, obtained by photo polymerization of the polymer SU8. In the paper the mode sensitivity has been calculated as a function of the thickness in a bimodal structure. The differential interference was analyzed concerning modes of the same types TE0 –TE1 and TM0 –TM1. The thickness of the layer has been determined when the interferometer is most sensitive to changes of the refractive index of the cover
Despite the fact that the theoretical foundations of the sensitivity of waveguide grating based (bio...
We demonstrate a polymer slot waveguide Young interferometer coated with a bilayer of Al2O3/TiO2. Th...
Thin-film coated single-mode–multimode–single-mode (SMS) structures have been analyzed both theoreti...
AbstractThe paper presents the results of investigations concerning measurements of the refractive i...
The paper presents the results of investigations concerning the measurement of the refractive index ...
A refractive index sensor based on bimodal waveguide interferometer is demonstrated on the low-cost ...
The variation of refractive indices with temperature in polymer waveguides on silicon substrate is p...
International audienceThe authors present a successful design, realisation and characterisation of s...
The spin-on photoresist SU8 from MicroChem has a relatively high refractive index (n=1.57 at 1550nm)...
The paper deals with considerations concerning planar waveguide structures, in which the polymer SU8...
Slot waveguide is a specific light-guiding structure with a property to enhance the optical field in...
A model and the waveguide parameters of a broadband, polymer-based slab waveguide difference interfe...
A Mach-Zehnder interferometer made with shallow rib waveguides is studied experimentally and using s...
In this work, the planar waveguides are investigated by depositing a SU-8 polymer on PET and quartz ...
In this thesis several polymer materials have been investigated with respect to their application as...
Despite the fact that the theoretical foundations of the sensitivity of waveguide grating based (bio...
We demonstrate a polymer slot waveguide Young interferometer coated with a bilayer of Al2O3/TiO2. Th...
Thin-film coated single-mode–multimode–single-mode (SMS) structures have been analyzed both theoreti...
AbstractThe paper presents the results of investigations concerning measurements of the refractive i...
The paper presents the results of investigations concerning the measurement of the refractive index ...
A refractive index sensor based on bimodal waveguide interferometer is demonstrated on the low-cost ...
The variation of refractive indices with temperature in polymer waveguides on silicon substrate is p...
International audienceThe authors present a successful design, realisation and characterisation of s...
The spin-on photoresist SU8 from MicroChem has a relatively high refractive index (n=1.57 at 1550nm)...
The paper deals with considerations concerning planar waveguide structures, in which the polymer SU8...
Slot waveguide is a specific light-guiding structure with a property to enhance the optical field in...
A model and the waveguide parameters of a broadband, polymer-based slab waveguide difference interfe...
A Mach-Zehnder interferometer made with shallow rib waveguides is studied experimentally and using s...
In this work, the planar waveguides are investigated by depositing a SU-8 polymer on PET and quartz ...
In this thesis several polymer materials have been investigated with respect to their application as...
Despite the fact that the theoretical foundations of the sensitivity of waveguide grating based (bio...
We demonstrate a polymer slot waveguide Young interferometer coated with a bilayer of Al2O3/TiO2. Th...
Thin-film coated single-mode–multimode–single-mode (SMS) structures have been analyzed both theoreti...