Downhill Progressive Landslides in Long Natural Slopes : Triggering Agents and Landslide Phases modeled with a Finite Difference Method

A large landslide in Tuve (Gothenburg, Sweden 1977) initiated the development of a model for slope stability analysis taking the deformation-softening of soft sensitive clays into consideration. The model studies triggering agents and five phases in progressive slope failure are identified: (1) in-situ, (2) disturbance, (3) unstable ‘dynamic’, (4) transitory (or permanent) equilibrium, and (5) ‘global’ failure. The clay resistance in these phases may differ widely; mostly due to different rates of loading. Two time dependent failure criteria are defined: (i) the triggering load condition in the disturbance Phase (2), and (ii) the transitory equilibrium in Phase (4), indicating whether minor downhill displacements or a veritable landslide catastrophe will occur. The analysis explains why downhill landslides tend to spread over vast areas of almost horizontal ground further down-slope. The model has been applied to landslides in Scandinavia and Canada. Three case studies are briefly discussed. The model is a finite difference approach, where local downhill deformations caused by normal forces is maintained compatible with deviatory shear deformations above the potential (or the established) failure surface. Software and an easy-to-use spreadsheet are introduced as well as recent developments. See also Video Abstract.Validerad; 2016; Nivå 2; 2016-11-02 (andbra)