Linear-time encoding and decoding of low-density parity-check codes

Low-density parity-check (LDPC) codes had a renaissance when they were rediscovered in the 1990’s. Since then LDPC codes have been an important part of the field of error-correcting codes, and have been shown to be able to approach the Shannon capacity, the limit at which we can reliably transmit information over noisy channels. Following this, many modern communications standards have adopted LDPC codes. Error-correction is equally important in protecting data from corruption on a hard-drive as it is in deep-space communications. It is most commonly used for example for reliable wireless transmission of data to mobile devices. For practical purposes, both encoding and decoding need to be of low complexity to achieve high throughput and low power consumption. This thesis provides a literature review of the current state-of-the-art in encoding and decoding of LDPC codes. Message- passing decoders are still capable of achieving the best error-correcting performance, while more recently considered bit-flipping decoders are providing a low-complexity alternative, albeit with some loss in error-correcting performance. An implementation of a low-complexity stochastic bit-flipping decoder is also presented. It is implemented for Graphics Processing Units (GPUs) in a parallel fashion, providing a peak throughput of 1.2 Gb/s, which is significantly higher than previous decoder implementations on GPUs. The error-correcting performance of a range of decoders has also been tested, showing that the stochastic bit-flipping decoder provides relatively good error-correcting performance with low complexity. Finally, a brief comparison of encoding complexities for two code ensembles is also presented