Add to ORKGSputtered molybdenum disulfide film deposition and friction characteristics in vacuu
An optical microscope was used to study the lubrication and failure mechanisms of rubbed (burnished)...
This report consists of a review and evaluation of the work presented in the literature over the pas...
Prepared at Lewis Research Center."December 1967"--Cover.Includes bibliographical references (p. 10-...
Molybdenum disulfide (MoS2) is a good solid film lubricant for vacuum and spacecraft applications. T...
The present practices, limitations, and understanding of thin sputtered MoS2 films are reviewed. Spu...
Thin sputter deposited MoS2 films in the 2000 to 6000 A thickness range have shown excellent lubrica...
Friction, wear, and wear lives of rubbed molybdenum disulfide (MoS2 films applied to sanded 440C HT ...
Potential and present sputtering technology is discussed as it applies to the deposition of solid fi...
It is shown that the tribological quality of MoS2 lubricant films formed by magnetron sputtering is ...
Molybdenum disulfide films 300 to 400 A thick were rf sputtered on aluminum and nickel surfaces at e...
An optical microscope was used to study the lubrication and failure mechanisms of rubbed MoS2 films ...
This report consists of a review and evaluation of the work presented in the literature over the pas...
Three microstructural growth stages of sputtered MoS2 films were identified with respect to film thi...
Solid film lubricants of radio frequency sputtered molybdenum disulfide (MoS2) were applied to silve...
Friction experiments in ultrahigh vacuum to evaluate sputtered MoS2 film lubricant
An optical microscope was used to study the lubrication and failure mechanisms of rubbed (burnished)...
This report consists of a review and evaluation of the work presented in the literature over the pas...
Prepared at Lewis Research Center."December 1967"--Cover.Includes bibliographical references (p. 10-...
Molybdenum disulfide (MoS2) is a good solid film lubricant for vacuum and spacecraft applications. T...
The present practices, limitations, and understanding of thin sputtered MoS2 films are reviewed. Spu...
Thin sputter deposited MoS2 films in the 2000 to 6000 A thickness range have shown excellent lubrica...
Friction, wear, and wear lives of rubbed molybdenum disulfide (MoS2 films applied to sanded 440C HT ...
Potential and present sputtering technology is discussed as it applies to the deposition of solid fi...
It is shown that the tribological quality of MoS2 lubricant films formed by magnetron sputtering is ...
Molybdenum disulfide films 300 to 400 A thick were rf sputtered on aluminum and nickel surfaces at e...
An optical microscope was used to study the lubrication and failure mechanisms of rubbed MoS2 films ...
This report consists of a review and evaluation of the work presented in the literature over the pas...
Three microstructural growth stages of sputtered MoS2 films were identified with respect to film thi...
Solid film lubricants of radio frequency sputtered molybdenum disulfide (MoS2) were applied to silve...
Friction experiments in ultrahigh vacuum to evaluate sputtered MoS2 film lubricant
An optical microscope was used to study the lubrication and failure mechanisms of rubbed (burnished)...
This report consists of a review and evaluation of the work presented in the literature over the pas...
Prepared at Lewis Research Center."December 1967"--Cover.Includes bibliographical references (p. 10-...