I 123 production for use in nuclear medicine by spallation of xenon

A target design for irradiation of NaI at high beam current

Sodd, V. J.
Blue, J. W.

January 1972

A solution to the targetry problems encountered when the iodine nucleus is a target for cyclotron ir...

STUDY OF IMPORTANT PARAMETERS ON THE IRRADIATION OF 124Xe, TO IMPROVE THE PRODUCTION OF 123I WITH HIGH PURITY USING THE CYCLONE-30 CYCLOTRON AT IPEN-CNEN/SP

Luiz Carlos do Amaral Sumiya

January 2006

O desenvolvimento da Medicina Nuclear, aliado à evolução dos equipamentos de diagnóstico e terapia, ...

Radioactive isotopes produced for medical applications: setting up an accurate measurement method for production cross section

Nigron, Etienne
Guertin, Arnaud
Haddad, Ferid

October 2018

National audienceThe nuclear medicine is a medical specialty that uses radionuclides for diagnosis o...

Cyclotron production of I-123: An evaluation of the nuclear reactions which produce this isotope

Wellman, H. N.
Scholz, K. L.
Sodd, V. J.
Blue, J. W.

October 1970

The use of the various nuclear reactions is described by which I-123,a low radiation dose radiopharm...

Self-vapor cooled targets for production of I-123 at high current accelerators

Scholz, K. L.
Blue, J. W.
Sodd, V. J.

January 1974

The basic elements of the vapor cooled target system are shown. This system can be operated as a hea...

A target for production of radioxenons

Blue, J. W.
Jha, S.
Sodd, V. J.
Vincent, J. S.
Leonard, R.

January 1976

A liquid cesium target has been developed which allows the production and separate identification of...

A Study of Radioxenon Production from Proton Bombardment of Metallic Cesium

Friesel, D.L.
Sodd, V.J.
Liu, D.C.
Blue, J.W.

January 1977

This work was supported by National Science Foundation Grant PHY 76-84033 and Indiana Universit

Production of High-Purity 123-I for Clinical and Research Purposes

Friesel, D.L.
Blue, J.
Wellman, H.N.
Kavuula, M.
Smith, Wayne

January 1976

This work was supported by National Science Foundation Grant PHY 75-00289 and Indiana Universit

Targets for producing high purity I-123

Blue, J. W.

May 1978

Tellurium powder in improved targets is bombarded with a cyclotron beam to produce Xe-123. Flowing g...

NUCLEAR REACTIONS FOR PRODUCTION OF IODIUM AND THALLIUM RADIONUCLIDES FOR MEDICAL PURPOSES

Kurenkov, Nikolay Vasilievich

January 1996

The yield of the xenon-123 in the photonuclear reaction has been evaluated, the differential and int...

Development of medicine-intended isotope production technologies at Yerevan Physics Institute

Albert Avetisyan
Robert Avagyan
Ivetta Kerobyan
Ruben Dallakyan
Gevorg Harutyunyan
Aleksandr Melkonyan

May 2015

Accelerator-based 99mTc and 123I isotopes production technologies were created and developed at A.Al...

Study and development of a new methodology for production of iodine-125 from xenon-124 through the method of neutron activation

Costa, Osvaldo Luiz da

October 2015

Neste trabalho foi desenvolvida uma nova metodologia de produção de iodo-125, que resultou na primei...

Radioxenon generation using highly enriched uranium

May 2008

Graduation date: 2009This work focuses on the generation and collection of four specific\ud radioxen...

Development of Cyclotron Radionuclides for Medical Applications: From fundamental nuclear data to sophisticated production technology

Qaim, S. M.

January 2015

Soon after the discovery of radioactivity it was shown that radionuclides can be used both for diagn...

A NEW PRODUCTION METHOD OF HIGH SPECIFIC ACTIVITY RADIONUCLIDES TOWARDS INNOVATIVE RADIOPHARMACEUTICALS: THE ISOLPHARM PROJECT

Vettorato E.
Morselli L.
Ballan M.
Arzenton A.
Khwairakpam O. S.
Verona M.
Scarpa D.
Corradetti S.
Caliceti P.
Di Marco V.
Mastrotto F.
Marzaro G.
Realdon N.
Zenoni A.
Donzella A.
Lunardon M.
Zangrando L.
Asti M.
Russo G.
Mariotti E.
Maniglio D.
Andrighetto A.

January 2022

Radionuclides of interest in nuclear medicine are generally produced in cyclotrons or nuclear reacto...

A target design for irradiation of NaI at high beam current

Sodd, V. J.
Blue, J. W.

January 1972

A solution to the targetry problems encountered when the iodine nucleus is a target for cyclotron ir...

STUDY OF IMPORTANT PARAMETERS ON THE IRRADIATION OF 124Xe, TO IMPROVE THE PRODUCTION OF 123I WITH HIGH PURITY USING THE CYCLONE-30 CYCLOTRON AT IPEN-CNEN/SP

Luiz Carlos do Amaral Sumiya

January 2006

O desenvolvimento da Medicina Nuclear, aliado à evolução dos equipamentos de diagnóstico e terapia, ...

Radioactive isotopes produced for medical applications: setting up an accurate measurement method for production cross section

Nigron, Etienne
Guertin, Arnaud
Haddad, Ferid

October 2018

National audienceThe nuclear medicine is a medical specialty that uses radionuclides for diagnosis o...

Cyclotron production of I-123: An evaluation of the nuclear reactions which produce this isotope

Wellman, H. N.
Scholz, K. L.
Sodd, V. J.
Blue, J. W.

October 1970

The use of the various nuclear reactions is described by which I-123,a low radiation dose radiopharm...

Self-vapor cooled targets for production of I-123 at high current accelerators

Scholz, K. L.
Blue, J. W.
Sodd, V. J.

January 1974

The basic elements of the vapor cooled target system are shown. This system can be operated as a hea...

A target for production of radioxenons

Blue, J. W.
Jha, S.
Sodd, V. J.
Vincent, J. S.
Leonard, R.

January 1976

A liquid cesium target has been developed which allows the production and separate identification of...

A Study of Radioxenon Production from Proton Bombardment of Metallic Cesium

Friesel, D.L.
Sodd, V.J.
Liu, D.C.
Blue, J.W.

January 1977

This work was supported by National Science Foundation Grant PHY 76-84033 and Indiana Universit

Production of High-Purity 123-I for Clinical and Research Purposes

Friesel, D.L.
Blue, J.
Wellman, H.N.
Kavuula, M.
Smith, Wayne

January 1976

This work was supported by National Science Foundation Grant PHY 75-00289 and Indiana Universit

Targets for producing high purity I-123

Blue, J. W.

May 1978

Tellurium powder in improved targets is bombarded with a cyclotron beam to produce Xe-123. Flowing g...

NUCLEAR REACTIONS FOR PRODUCTION OF IODIUM AND THALLIUM RADIONUCLIDES FOR MEDICAL PURPOSES

Kurenkov, Nikolay Vasilievich

January 1996

The yield of the xenon-123 in the photonuclear reaction has been evaluated, the differential and int...

Development of medicine-intended isotope production technologies at Yerevan Physics Institute

Albert Avetisyan
Robert Avagyan
Ivetta Kerobyan
Ruben Dallakyan
Gevorg Harutyunyan
Aleksandr Melkonyan

May 2015

Accelerator-based 99mTc and 123I isotopes production technologies were created and developed at A.Al...

Study and development of a new methodology for production of iodine-125 from xenon-124 through the method of neutron activation

Costa, Osvaldo Luiz da

October 2015

Neste trabalho foi desenvolvida uma nova metodologia de produção de iodo-125, que resultou na primei...

Radioxenon generation using highly enriched uranium

May 2008

Graduation date: 2009This work focuses on the generation and collection of four specific\ud radioxen...

Development of Cyclotron Radionuclides for Medical Applications: From fundamental nuclear data to sophisticated production technology

Qaim, S. M.

January 2015

Soon after the discovery of radioactivity it was shown that radionuclides can be used both for diagn...

A NEW PRODUCTION METHOD OF HIGH SPECIFIC ACTIVITY RADIONUCLIDES TOWARDS INNOVATIVE RADIOPHARMACEUTICALS: THE ISOLPHARM PROJECT

Vettorato E.
Morselli L.
Ballan M.
Arzenton A.
Khwairakpam O. S.
Verona M.
Scarpa D.
Corradetti S.
Caliceti P.
Di Marco V.
Mastrotto F.
Marzaro G.
Realdon N.
Zenoni A.
Donzella A.
Lunardon M.
Zangrando L.
Asti M.
Russo G.
Mariotti E.
Maniglio D.
Andrighetto A.

January 2022

Radionuclides of interest in nuclear medicine are generally produced in cyclotrons or nuclear reacto...

A target design for irradiation of NaI at high beam current

Sodd, V. J.
Blue, J. W.

January 1972

A solution to the targetry problems encountered when the iodine nucleus is a target for cyclotron ir...

STUDY OF IMPORTANT PARAMETERS ON THE IRRADIATION OF 124Xe, TO IMPROVE THE PRODUCTION OF 123I WITH HIGH PURITY USING THE CYCLONE-30 CYCLOTRON AT IPEN-CNEN/SP

Luiz Carlos do Amaral Sumiya

January 2006

O desenvolvimento da Medicina Nuclear, aliado à evolução dos equipamentos de diagnóstico e terapia, ...

Radioactive isotopes produced for medical applications: setting up an accurate measurement method for production cross section

Nigron, Etienne
Guertin, Arnaud
Haddad, Ferid

October 2018

National audienceThe nuclear medicine is a medical specialty that uses radionuclides for diagnosis o...

I 123 production for use in nuclear medicine by spallation of xenon

Abstract

Extracted data

I 123 production for use in nuclear medicine by spallation of xenon

Abstract

Extracted data

Related items

Related items