Add to ORKGThe design, fabrication, and evaluation of a single ended 12 GHz down-converter suitable for use in a low cost satellite ground terminal is described. The mixer uses waveguide, coaxial and MIC (microwave integrated circuit) transmission line components. Theoretical and experimental analyses of several microstrip circuit elements are presented including the traveling wave-directional filter, quarter wave-length proximity directional coupler, low pass filter and the quarterwave band stop filter. The optimum performance achieved for the mixer using a packaged diode was 9.4 db conversion loss and a bandwidth of 275 MHz
Design of low-cost microwave adaptor suitable for television reception from high-power communication...
The following is investigated; (1) the design of a 183 GHz single ended fundamental mixer to serve a...
This paper presents the demonstration of an ultra compact High Temperature Cofired Ceramic (HTCC) ba...
The design and development of the front-end for a multi-carrier system that allows multiplex signal ...
The design, fabrication, and performance of elements of a low cost FM microwave satellite ground sta...
A 12-channel synchronous phase lock video receiver consisting of an outdoor downconverter unit and a...
The fabrication and evaluation of 10 engineering prototype ground signal processing systems of three...
The development, fabrication, and testing of five image and sum frequency enhanced mixed diode conve...
Several MMIC downconverters have been developed for use in experimental 30/20 GHz Satellite Personal...
The technical and economical feasibility of using the 12 GHz band for broadcasting from satellites w...
The design and test of an E-band (81-86 GHz) down-converter mixer for satellite communications is gi...
The results of the initial implementation of the proposed design, the design modifications, and limi...
In this paper, design and simulation of receiver analogue front-end portion (downconversion mixer) ...
A circuit that can function as a phase switch, frequency mixer, or frequency multiplier operates ove...
This paper describes the design and realization of a wide band single balanced fully integrated up-c...
Design of low-cost microwave adaptor suitable for television reception from high-power communication...
The following is investigated; (1) the design of a 183 GHz single ended fundamental mixer to serve a...
This paper presents the demonstration of an ultra compact High Temperature Cofired Ceramic (HTCC) ba...
The design and development of the front-end for a multi-carrier system that allows multiplex signal ...
The design, fabrication, and performance of elements of a low cost FM microwave satellite ground sta...
A 12-channel synchronous phase lock video receiver consisting of an outdoor downconverter unit and a...
The fabrication and evaluation of 10 engineering prototype ground signal processing systems of three...
The development, fabrication, and testing of five image and sum frequency enhanced mixed diode conve...
Several MMIC downconverters have been developed for use in experimental 30/20 GHz Satellite Personal...
The technical and economical feasibility of using the 12 GHz band for broadcasting from satellites w...
The design and test of an E-band (81-86 GHz) down-converter mixer for satellite communications is gi...
The results of the initial implementation of the proposed design, the design modifications, and limi...
In this paper, design and simulation of receiver analogue front-end portion (downconversion mixer) ...
A circuit that can function as a phase switch, frequency mixer, or frequency multiplier operates ove...
This paper describes the design and realization of a wide band single balanced fully integrated up-c...
Design of low-cost microwave adaptor suitable for television reception from high-power communication...
The following is investigated; (1) the design of a 183 GHz single ended fundamental mixer to serve a...
This paper presents the demonstration of an ultra compact High Temperature Cofired Ceramic (HTCC) ba...